
UNITED CHEMICAL उत्पाद प्रौद्योगिकी · 20 नवंबर 2026
एक गैरसाइनाइड route is only as good as its control logic
Operations evaluate a leaching agent on peak recovery and stop there. In practice the operating cost is set by three variables that move together.
Operations evaluate a gold leaching agent on peak recovery and stop there. In practice the operating cost is set by pH, reagent dosage and solution chemistry moving together. AuLeach™ गोल्ड लीचिंग एजेंट (GDA) – गैर-हानिकारक ships as a common chemical and is used in निक्षालन ढेर और वैट लीचिंग circuits where permissible cyanide use is constrained or permitting is difficult. This guide shows how to tune it without rebuilding the plant.
1. Where the non-cyanide route fits
Three situations favour a non-cyanide lixiviant: jurisdictions where cyanide permitting is constrained; sites located far from licensed cyanide supply chains; and ores where cyanide consumption is uneconomic because of base-metal demand. In each case the decision should be made on test work, not on assumption. The comparison is straightforward: run the same ore through a conventional कार्बन-इन-लीच bottle roll and a GDA bottle roll, then compare extraction, consumption and solution chemistry.
For projects where cyanide remains the preferred route, AuCyan™ सोडियम साइनाइड NaCN (≥98.3%) remains the reference reagent. The two routes are complementary, not competing, and a technical team should be able to model both.
2. Bottle-roll test design
Start with the ore, not the reagent. Characterise each ore domain separately. A typical programme uses 1 kg of pulverised ore at 40% solids, with three dosage levels and a control, sampled at 2, 6, 12 and 24 hours. Record gold extraction, reagent consumption and pH drift at every point. The shape of the extraction curve tells you whether the circuit is reagent-limited or kinetics-limited.
| परीक्षण चर | विशिष्ट श्रेणी | इससे क्या पता चलता है |
|---|---|---|
| ठोस तत्व | 35 - 45% | Mixing and reagent contact |
| खुराक का स्तर | Low / mid / high | Economical dose |
| pH setpoints | Site-specific band | Stability window |
| नमूना समय | 2 / 6 / 12 / 24 h | Kinetics curve |
गोल्डन ट्रायंगल — तीन उत्पाद, एक आपूर्तिकर्ता
AuCyan™ सोडियम साइनाइड NaCN (≥98.3%) · AuCarb™ गोल्ड रिकवरी नारियल के खोल से बना सक्रिय कार्बन (≥99% कठोरता) · AuLeach™ गोल्ड लीचिंग एजेंट (GDA) – गैर-हानिकारक
3. pH control — the master variable
pH governs reagent stability, gold surface chemistry and the behaviour of interfering species. Establish a site-specific setpoint from bottle-roll work and hold it with automatic control. Drift outside the agreed band shows up first as slower extraction, then as higher consumption. In a वैट लीचिंग circuit, pH should be logged at the top, middle and bottom of each vat to detect stratification.
4. Split dosing and the knee of the curve
If the first half of the dose delivers 80% of extraction and the second half delivers 4%, the second half is not buying recovery — it is buying inventory. Split dosing with measurement lets you stop at the knee of the curve. On a 2,000 t/day वैट लीचिंग circuit, trimming an unproductive 0.15 kg/t saves around 300 kg/day, or roughly 110 t/year, with no change in gold output.
Unproductive dose: 0.15 किग्रा/टन
Daily saving at 2,000 t/day: 300 किग्रा / दिन
वार्षिक बचत: ≈ 110 t/year
5. Heap leaching versus Vat leaching commissioning
| स्टेप | निक्षालन ढेर | वैट लीचिंग |
|---|---|---|
| 1 — Characterise | Column tests per ore domain | Bottle roll per ore domain |
| 2 — Set pH | Irrigation solution control | Vat solution control |
| 3 — Dose | Split across irrigation stages | Split across leach cycles |
| 4 — Recover | Carbon-in-Column from pregnant solution | Carbon-in-Pulp or solution wash |
Recovery of dissolved gold from the pregnant solution is a separate design step. AuCarb™ गोल्ड रिकवरी नारियल के खोल से बना सक्रिय कार्बन (≥99% कठोरता) में प्रयोग किया जाता है Carbon-in-Column service for clarified heap-leach solutions, selected on K and R values from the same test programme.
6. Consumption tracking
Log reagent consumption per tonne, per pad or per vat, and compare against the test-work band every shift. A divergence of more than 10% from the bottle-roll expectation should trigger a review of pH control, ore blending and dosing equipment before any additional reagent is ordered.
7. Supply and documentation
AuLeach™ GDA ships as a common chemical with a batch COA, टीडीएस और एमएसडीएसमें 25 किलोग्राम के भारी-भरकम लैमिनेटेड पीई बैग. MOQ is 1×20' FCL ≈ 28 MT के अंतर्गत एफओबी/सीआईएफ शर्तों। United Chemical serves more than 77 countries. Complimentary samples of AuLeach™ and AuCarb™ are available for independent laboratory testing before commercial supply.
8। सामान्य प्रश्न
Q1 — Is this a non-cyanide system?
Yes. AuLeach™ GDA is a non-cyanide gold leaching agent supplied as a common chemical.
Q2 — Do I need to rebuild my circuit?
Typically no. The route is designed for existing Heap leaching and Vat leaching circuits, subject to test work.
Q3 — How is the reagent described for handling?
It is described as Non-Hazardous, with a batch COA, TDS and MSDS. No stronger characterisation is made.
Q4 — How do I choose the dose?
From a three-level bottle-roll programme, stopping at the knee of the extraction curve.
Q5 — What MOQ and terms apply?
1×20' एफसीएल ≈ 28 मीट्रिक टन, एफओबी या सीआईएफ।
Q6 — Can the gold be recovered on कार्बन?
Yes. AuCarb™ carbon in Carbon-in-Column or Carbon-in-Pulp service is selected from the same test programme.
Commission a leach trial
Send ore grade, pH data and circuit configuration. We will return a bottle-roll protocol, a dosing curve and a landed-cost estimate.
संपर्क करें · लीचिंग अभिकर्मक · तीन उत्पादों का अवलोकन · रासायनिक प्रश्नोत्तर · उद्योग समाचार
व्हाट्सएप +86 173 9270 5576 · info@unitedchemicalcn.com
- यादृच्छिक सामग्री
- गर्म सामग्री
- गर्म समीक्षा सामग्री
- कास्टिक सोडा फ्लेक्स NaOH 96%-99% सोडियम हाइड्रोक्साइड
- कैल्शियम पेरोक्साइड 60% परख पीले रंग की गोली
- कॉपर सल्फेट मोनोहाइड्रेट (CuSO4-H2O) पाउडर (Cu:34% न्यूनतम)
- मैं खनन रसायनों की आर्थिक व्यवहार्यता और प्रभावशीलता का आकलन कैसे करूँ?
- निर्जल ऑक्सालिक एसिड 99.6% औद्योगिक ग्रेड
- एटिड्रोनिक एसिड | HEDP
- 1खनन के लिए रियायती सोडियम साइनाइड (CAS: 143-33-9) - उच्च गुणवत्ता और प्रतिस्पर्धी मूल्य निर्धारण
- 2सोडियम साइनाइड 98.3% CAS 143-33-9 NaCN, स्वर्ण संवर्धन एजेंट, खनन रासायनिक उद्योगों के लिए आवश्यक।
- 3सोडियम साइनाइड निर्यात पर चीन के नए नियम और अंतर्राष्ट्रीय खरीदारों के लिए मार्गदर्शन
- 4सोडियम सायनाइड (CAS: 143-33-9) अंतिम उपयोगकर्ता प्रमाणपत्र (चीनी और अंग्रेजी संस्करण)
- 5अंतर्राष्ट्रीय साइनाइड (सोडियम साइनाइड) प्रबंधन कोड - स्वर्ण खान स्वीकृति मानक
- 6चीन कारखाना सल्फ्यूरिक एसिड 98%
- 7निर्जल ऑक्सालिक एसिड 99.6% औद्योगिक ग्रेड
- 1सोडियम साइनाइड 98.3% CAS 143-33-9 NaCN, स्वर्ण संवर्धन एजेंट, खनन रासायनिक उद्योगों के लिए आवश्यक।
- 2उच्च शुद्धता · स्थिर प्रदर्शन · उच्च रिकवरी - आधुनिक स्वर्ण निक्षालन के लिए सोडियम साइनाइड
- 3United Chemicalकी शोध टीम डेटा-संचालित अंतर्दृष्टि के माध्यम से प्राधिकरण का प्रदर्शन करती है
- 4AuCyan™ उच्च-प्रदर्शन सोडियम साइनाइड | वैश्विक स्वर्ण खनन के लिए 98.3% शुद्धता
- 5डिजिटल इलेक्ट्रॉनिक डेटोनेटर (विलंब समय 0 ~ 16000ms)
- 6उच्च-शक्ति, उच्च-परिशुद्धता शॉक ट्यूब डेटोनेटर
- 7उद्योग इलेक्ट्रिक डेटोनेटर




ऑनलाइन संदेश परामर्श
टिप्पणी जोड़ें: