
UNITED CHEMICAL · បច្ចេកវិទ្យាផលិតផល · ថ្ងៃទី 20 ខែវិច្ឆិកា ឆ្នាំ 2026
A non-ស៊ីអ៊ីតណែត route is only as good as its control logic
Operations evaluate a leaching agent on peak recovery and stop there. In practice the operating cost is set by three variables that move together.
Operations evaluate a gold leaching agent on peak recovery and stop there. In practice the operating cost is set by pH, reagent dosage and solution chemistry moving together. សារធាតុចម្រាញ់មាស AuLeach™ (GDA) – មិនមានគ្រោះថ្នាក់ ships as a common chemical and is used in ការលេចធ្លាយ និង ការលាងជម្រះអាករលើតម្លៃបន្ថែម circuits where permissible cyanide use is constrained or permitting is difficult. This guide shows how to tune it without rebuilding the plant.
1. Where the non-cyanide route fits
Three situations favour a non-cyanide lixiviant: jurisdictions where cyanide permitting is constrained; sites located far from licensed cyanide supply chains; and ores where cyanide consumption is uneconomic because of base-metal demand. In each case the decision should be made on test work, not on assumption. The comparison is straightforward: run the same ore through a conventional Carbon-in-Leach bottle roll and a GDA bottle roll, then compare extraction, consumption and solution chemistry.
For projects where cyanide remains the preferred route, AuCyan™ សូដ្យូម ស៊ីយ៉ានីត NaCN (≥98.3%) remains the reference reagent. The two routes are complementary, not competing, and a technical team should be able to model both.
2. Bottle-roll test design
Start with the ore, not the reagent. Characterise each ore domain separately. A typical programme uses 1 kg of pulverised ore at 40% solids, with three dosage levels and a control, sampled at 2, 6, 12 and 24 hours. Record gold extraction, reagent consumption and pH drift at every point. The shape of the extraction curve tells you whether the circuit is reagent-limited or kinetics-limited.
| Test variable | ជួរធម្មតា | អ្វីដែលវាបង្ហាញ |
|---|---|---|
| មាតិការឹង | 35 - 45% | Mixing and reagent contact |
| Dosage levels | Low / mid / high | Economical dose |
| pH setpoints | Site-specific band | Stability window |
| Sample times | 2 / 6 / 12 / 24 h | Kinetics curve |
ត្រីកោណមាស — ផលិតផលបី អ្នកផ្គត់ផ្គង់ម្នាក់
AuCyan™ សូដ្យូម ស៊ីយ៉ានីត NaCN (≥98.3%) · កាបូនដែលបានធ្វើឱ្យសកម្មពីសំបកដូង AuCarb™ សម្រាប់ស្តារមាស (≥99%) · សារធាតុចម្រាញ់មាស AuLeach™ (GDA) – មិនមានគ្រោះថ្នាក់
3. pH control — the master variable
pH governs reagent stability, gold surface chemistry and the behaviour of interfering species. Establish a site-specific setpoint from bottle-roll work and hold it with automatic control. Drift outside the agreed band shows up first as slower extraction, then as higher consumption. In a ការលាងជម្រះអាករលើតម្លៃបន្ថែម circuit, pH should be logged at the top, middle and bottom of each vat to detect stratification.
4. Split dosing and the knee of the curve
If the first half of the dose delivers 80% of extraction and the second half delivers 4%, the second half is not buying recovery — it is buying inventory. Split dosing with measurement lets you stop at the knee of the curve. On a 2,000 t/day ការលាងជម្រះអាករលើតម្លៃបន្ថែម circuit, trimming an unproductive 0.15 kg/t saves around 300 kg/day, or roughly 110 t/year, with no change in gold output.
Unproductive dose: 0.15 គីឡូក្រាម / t
Daily saving at 2,000 t/day: 300 គីឡូក្រាម / ថ្ងៃ។
Annual saving: ≈ 110 t/year
5. Heap leaching versus Vat leaching commissioning
| ជំហាន | ការលេចធ្លាយ | ការលាងជម្រះអាករលើតម្លៃបន្ថែម |
|---|---|---|
| 1 — Characterise | Column tests per ore domain | Bottle roll per ore domain |
| 2 — Set pH | Irrigation solution control | Vat solution control |
| 3 — Dose | Split across irrigation stages | Split across leach cycles |
| 4 — Recover | Carbon-in-Column from pregnant solution | Carbon-in-Pulp or solution wash |
Recovery of dissolved gold from the pregnant solution is a separate design step. កាបូនដែលបានធ្វើឲ្យសកម្មពីសំបកដូង AuCarb™ Gold Recovery (ភាពរឹង ≥99%) ត្រូវបានគេប្រើនៅក្នុង Carbon-in-Column service for clarified heap-leach solutions, selected on K and R values from the same test programme.
6. Consumption tracking
Log reagent consumption per tonne, per pad or per vat, and compare against the test-work band every shift. A divergence of more than 10% from the bottle-roll expectation should trigger a review of pH control, ore blending and dosing equipment before any additional reagent is ordered.
7. Supply and documentation
AuLeach™ GDA ships as a common chemical with a batch COA, TDS និង MSDSក្នុងការ ថង់ PE ក្រាស់ 25 គីឡូក្រាម ស្រោបដោយស្រទាប់ស្តើង. អប្បបរមាគឺ ១×២០ហ្វីត FCL ≈ ១៥តោន ក្រោមការ FOB/CIF លក្ខខណ្ឌ United Chemical serves more than 77 countries. Complimentary samples of AuLeach™ and AuCarb™ are available for independent laboratory testing before commercial supply.
8 ។ សំនួរញឹកញាប់
Q1 — Is this a non-cyanide system?
Yes. AuLeach™ GDA is a non-cyanide gold leaching agent supplied as a common chemical.
Q2 — Do I need to rebuild my circuit?
Typically no. The route is designed for existing Heap leaching and Vat leaching circuits, subject to test work.
Q3 — How is the reagent described for handling?
It is described as Non-Hazardous, with a batch COA, TDS and MSDS. No stronger characterisation is made.
Q4 — How do I choose the dose?
From a three-level bottle-roll programme, stopping at the knee of the extraction curve.
Q5 — What MOQ and terms apply?
1×20' FCL ≈ 28 MT, FOB or CIF.
Q6 — Can the gold be recovered on ការបោន?
Yes. AuCarb™ carbon in Carbon-in-Column or Carbon-in-Pulp service is selected from the same test programme.
Commission a leach trial
Send ore grade, pH data and circuit configuration. We will return a bottle-roll protocol, a dosing curve and a landed-cost estimate.
ទំនាក់ទំនងមកកាន់ពួកយើង · សារធាតុចម្រាញ់ · ទិដ្ឋភាពទូទៅនៃផលិតផលបីមុខ · សំណួរដែលសួរញឹកញាប់អំពីគីមី · ដំណឹងឧស្សាហកម្ម
WhatsApp +៨៦ ១៧៣ ៩២៧០ ៥៥៧៦ info@unitedchemicalcn.com
- មាតិកាចៃដន្យ
- មាតិកាក្តៅ
- មាតិកាពិនិត្យឡើងវិញក្តៅ
- សូដាដុត Flakes NaOH 96%-99% សូដ្យូមអ៊ីដ្រូសែន
- Calcium Peroxide 60% Assay Yellowish Tablet
- ម្សៅស្ពាន់ស៊ុលហ្វាត Monohydrate (CuSO4-H2O) (Cu: 34% នាទី)
- តើខ្ញុំវាយតម្លៃលទ្ធភាពសេដ្ឋកិច្ច និងប្រសិទ្ធភាពនៃសារធាតុគីមីក្នុងការជីកយករ៉ែដោយរបៀបណា?
- អាស៊ីត Oxalic ដែលគ្មានជាតិទឹក 99.6% ថ្នាក់ទីឧស្សាហកម្ម
- អាស៊ីត Etidronic | HEDP
- 1បញ្ចុះតម្លៃសូដ្យូម Cyanide (CAS: 143-33-9) សម្រាប់ការជីកយករ៉ែ - គុណភាពខ្ពស់ និងតម្លៃប្រកួតប្រជែង
- 2សូដ្យូមស៊ីយ៉ានីត 98.3% CAS 143-33-9 សារធាតុផ្សំមាស NaCN សំខាន់សម្រាប់ឧស្សាហកម្មគីមីរ៉ែ
- 3បទប្បញ្ញត្តិថ្មីរបស់ចិនស្តីពីការនាំចេញសូដ្យូមស៊ីយ៉ានត និងការណែនាំសម្រាប់អ្នកទិញអន្តរជាតិ
- 4សូដ្យូម Cyanide (CAS: 143-33-9) វិញ្ញាបនបត្រអ្នកប្រើប្រាស់ចុងក្រោយ (កំណែជាភាសាចិន និងអង់គ្លេស)
- 5កូដគ្រប់គ្រងអន្តរជាតិ Cyanide (សូដ្យូម cyanide) - ស្តង់ដារទទួលយករ៉ែមាស
- 6រោងចក្រចិន អាស៊ីតស៊ុលហ្វួរីក ៩៨%
- 7អាស៊ីត Oxalic ដែលគ្មានជាតិទឹក 99.6% ថ្នាក់ទីឧស្សាហកម្ម
- 1សូដ្យូមស៊ីយ៉ានីត 98.3% CAS 143-33-9 សារធាតុផ្សំមាស NaCN សំខាន់សម្រាប់ឧស្សាហកម្មគីមីរ៉ែ
- 2ភាពបរិសុទ្ធខ្ពស់ · ការអនុវត្តមានស្ថេរភាព · ការងើបឡើងវិញកាន់តែខ្ពស់ — សូដ្យូមស៊ីយ៉ានុតសម្រាប់ការលាងមាសទំនើប
- 3United Chemicalក្រុមស្រាវជ្រាវបង្ហាញពីសិទ្ធិអំណាចតាមរយៈការយល់ដឹងដែលជំរុញដោយទិន្នន័យ
- 4សូដ្យូម ស៊ីយ៉ានីត ដំណើរការខ្ពស់ AuCyan™ | ភាពបរិសុទ្ធ 98.3% សម្រាប់ការជីកយករ៉ែមាសសកល
- 5ឧបករណ៍បំផ្ទុះអេឡិចត្រូនិចឌីជីថល (ពេលវេលាពន្យាពេល 0 ~ 16000ms)
- 6ឧបករណ៍បំផ្ទុះបំពង់ឆក់ កម្លាំងខ្ពស់ ភាពជាក់លាក់ខ្ពស់។
- 7ឧបករណ៍បំផ្ទុះអគ្គិសនីឧស្សាហកម្ម




ការប្រឹក្សាសារតាមអ៊ីនធឺណិត
បន្ថែមមតិ៖