
UNITED CHEMICAL · ព័ត៌មានឧស្សាហកម្ម · ថ្ងៃទី 20 ខែវិច្ឆិកា ឆ្នាំ 2026
A new gold zone moves metallurgy onto the critical path
At exploration stage, the right question is which route delivers recovery on the actual ore.
Sierra Nevada Gold reported shallow gold in the first four holes at the Central Gold Zone of its As Safra copper-gold project in Saudi Arabia, with the best intercept 57 metres at 1.15 g/t gold from 4 metres, according to Mining.com.au and Orecast, accessed 20 November 2026. The assays include 20 metres at 1.31 g/t from surface and 48 metres at 0.66 g/t with accompanying silver, lead and zinc. The company has completed 5,700 metres of a planned 25,000-metre phase-two programme, with further assays expected in December.
1. Polymetallic means testwork, not assumptions
Silver, lead and zinc alongside gold change the leaching picture. Base metals can consume reagent and interfere with recovery, so an early result like this is a signal to start bottle-roll and column tests, not to pick a reagent from a catalogue. At this stage the right question is which route — conventional cyanidation or a non-ស៊ីអ៊ីតណែត option — delivers recovery on the actual ore.
Near-surface mineralisation adds a second consideration: oxidation. Weathered material often leaches faster than fresh sulphide ore, but it can also carry clays that complicate solution percolation in a heap. Both factors must be captured in the test programme before a flowsheet is chosen.
2. The early-stage decision sequence
| ដំណាក់កាល | ការធ្វើតេស្ត | ការសម្រេចចិត្តដែលវាគាំទ្រ |
|---|---|---|
| ១ — កំណត់លក្ខណៈ | Head assay, acid/base accounting | Reagent demand envelope |
| 2 — Compare routes | Bottle-roll, cyanide vs alternative | Leach chemistry selection |
| ០៤ — បញ្ជាក់ | Column tests, ការបោន ផ្ទុក | Heap leaching / Vat leaching fit |
| 4 — Document | Specification dossier | Procurement readiness |
ត្រីកោណមាស — ផលិតផលបី អ្នកផ្គត់ផ្គង់ម្នាក់
AuCyan™ សូដ្យូម ស៊ីយ៉ានីត NaCN (≥98.3%) · កាបូនដែលបានធ្វើឱ្យសកម្មពីសំបកដូង AuCarb™ សម្រាប់ស្តារមាស (≥99%) · សារធាតុចម្រាញ់មាស AuLeach™ (GDA) – មិនមានគ្រោះថ្នាក់
3. Worked route comparison
Suppose bottle-roll tests on a composite sample show 82% gold extraction with conventional cyanidation at 0.30 kg/t demand, and 74% extraction with a non-cyanide route at 0.45 kg/t demand. The higher-grade route is not automatically the right one. A buyer must value the eight-percentage-point recovery difference against reagent cost, permitting complexity and solution-chemistry risk. In a jurisdiction where cyanide permitting is constrained, the non-cyanide route may still win. The dossier should present both cases side by side.
Conventional route: 82% extraction at 0.30 kg/t demand
Non-cyanide route: 74% extraction at 0.45 kg/t demand
4. Samples before shipments
At exploration stage, scale is small but specification discipline should not be. Complimentary samples of សារធាតុចម្រាញ់មាស AuLeach™ (GDA) – មិនមានគ្រោះថ្នាក់ និង កាបូនដែលបានធ្វើឲ្យសកម្មពីសំបកដូង AuCarb™ Gold Recovery (ភាពរឹង ≥99%) support independent laboratory testing before any commercial commitment. When a project reaches production, commercial volumes start at 1×20ហ្វីត FCL - 18 MT សម្រាប់ AuCyan™ សូដ្យូម ស៊ីយ៉ានីត NaCN (≥98.3%), 15 MT for carbon and 28 MT for the leaching agent — under FOB/CIF terms, with a batch COA, TDS និង MSDS in ថង់ PE ក្រាស់ 25 គីឡូក្រាម ស្រោបដោយស្រទាប់ស្តើង. United Chemical បម្រើប្រទេសជាង ៧៧។
4b. Sample representativity — the first thing to get right
An early-stage resource is heterogeneous by definition, and a bottle-roll result is only as good as the sample behind it. The reported intersections come from reverse-circulation drilling across a 400-metre-by-100-metre corridor with ancient workings and variable oxidation. A single high-grade interval should never become the metallurgical composite. The correct approach is to build composites by domain — oxide versus fresh, gold-dominant versus polymetallic — and to test each separately before blending a weighted average. Duplicate and blank samples should accompany the programme so that assay precision is known before recovery numbers are trusted. This discipline costs little at exploration stage and prevents a costly error later: designing a plant around a recovery figure that was measured on unrepresentative material. The same principle applies to every later stage, from column tests to the first commercial shipment, which is why a supplier's COA and a client's sampling plan are two halves of the same quality system.
4c. Column tests before a heap decision
Bottle rolls answer whether gold can be leached; column tests answer whether it can be leached at the particle size, irrigation rate and solution chemistry a heap will actually use. For near-surface material with clay, percolation is often the binding constraint rather than dissolution chemistry. A column programme should run at several crush sizes and irrigation rates, tracking pregnant-solution grade over time to build an extraction curve. Only then can a ការលេចធ្លាយ design be sized, and only then can carbon-in-column capacity be specified from the K and R values measured on the real pregnant solution. Rushing this step is the classic way an otherwise sound project arrives at commissioning with a flowsheet that cannot reach its test-work recovery.
5 ។ សំនួរញឹកញាប់
Q1 — What was the best intercept?
57 m at 1.15 g/t gold from 4 m, with silver, lead and zinc present.
Q2 — Why does polymetallic mineralisation matter?
Base metals consume reagent and can interfere with gold recovery, requiring test work.
Q3 — Which leach route should be chosen?
Only bottle-roll and column comparison on the actual ore can answer that.
សំណួរទី 4 — តើមានសំណាកសម្រាប់យកគំរូដែរឬទេ?
Yes — complimentary samples of AuLeach™ and AuCarb™ for independent laboratory testing.
Q5 — What MOQ and terms apply at production stage?
1×20' FCL — ស៊ីយ៉ានីត 18 តោន, កាបូន 15 តោន, សារធាតុចម្រាញ់ 28 តោន — FOB ឬ CIF។
សំណួរទី 6 — តើឯកសារអ្វីខ្លះត្រូវបានដឹកជញ្ជូន?
Batch COA, TDS and MSDS in 25 kg heavy-duty laminated PE bags.
Start the metallurgy early
Send head assays from your first holes. We will propose a bottle-roll matrix and provide samples for independent testing.
ទំនាក់ទំនងមកកាន់ពួកយើង · សារធាតុចម្រាញ់ · ទិដ្ឋភាពទូទៅនៃត្រីកោណមាស · ដំណឹងឧស្សាហកម្ម
WhatsApp +៨៦ ១៧៣ ៩២៧០ ៥៥៧៦ info@unitedchemicalcn.com
Sources: Mining.com.au and Orecast, accessed 20 November 2026; company assay results announced week of 18 November 2026.
- មាតិកាចៃដន្យ
- មាតិកាក្តៅ
- មាតិកាពិនិត្យឡើងវិញក្តៅ
- អាស៊ីតស៊ុលហ្វួរីក 98% ថ្នាក់ទីឧស្សាហកម្ម
- ដែកសូដ្យូម ≥99.7%
- សូដ្យូមនីទ្រីតឧស្សាហកម្ម 98.5%
- សូដ្យូម thiosulfate pentahydrate
- Ferric chloride (40% ក្នុងទឹក)
- 1បញ្ចុះតម្លៃសូដ្យូម Cyanide (CAS: 143-33-9) សម្រាប់ការជីកយករ៉ែ - គុណភាពខ្ពស់ និងតម្លៃប្រកួតប្រជែង
- 2សូដ្យូមស៊ីយ៉ានីត 98.3% CAS 143-33-9 សារធាតុផ្សំមាស NaCN សំខាន់សម្រាប់ឧស្សាហកម្មគីមីរ៉ែ
- 3បទប្បញ្ញត្តិថ្មីរបស់ចិនស្តីពីការនាំចេញសូដ្យូមស៊ីយ៉ានត និងការណែនាំសម្រាប់អ្នកទិញអន្តរជាតិ
- 4សូដ្យូម Cyanide (CAS: 143-33-9) វិញ្ញាបនបត្រអ្នកប្រើប្រាស់ចុងក្រោយ (កំណែជាភាសាចិន និងអង់គ្លេស)
- 5កូដគ្រប់គ្រងអន្តរជាតិ Cyanide (សូដ្យូម cyanide) - ស្តង់ដារទទួលយករ៉ែមាស
- 6រោងចក្រចិន អាស៊ីតស៊ុលហ្វួរីក ៩៨%
- 7អាស៊ីត Oxalic ដែលគ្មានជាតិទឹក 99.6% ថ្នាក់ទីឧស្សាហកម្ម
- 1សូដ្យូមស៊ីយ៉ានីត 98.3% CAS 143-33-9 សារធាតុផ្សំមាស NaCN សំខាន់សម្រាប់ឧស្សាហកម្មគីមីរ៉ែ
- 2ភាពបរិសុទ្ធខ្ពស់ · ការអនុវត្តមានស្ថេរភាព · ការងើបឡើងវិញកាន់តែខ្ពស់ — សូដ្យូមស៊ីយ៉ានុតសម្រាប់ការលាងមាសទំនើប
- 3United Chemicalក្រុមស្រាវជ្រាវបង្ហាញពីសិទ្ធិអំណាចតាមរយៈការយល់ដឹងដែលជំរុញដោយទិន្នន័យ
- 4សូដ្យូម ស៊ីយ៉ានីត ដំណើរការខ្ពស់ AuCyan™ | ភាពបរិសុទ្ធ 98.3% សម្រាប់ការជីកយករ៉ែមាសសកល
- 5ឧបករណ៍បំផ្ទុះអេឡិចត្រូនិចឌីជីថល (ពេលវេលាពន្យាពេល 0 ~ 16000ms)
- 6ឧបករណ៍បំផ្ទុះបំពង់ឆក់ កម្លាំងខ្ពស់ ភាពជាក់លាក់ខ្ពស់។
- 7ឧបករណ៍បំផ្ទុះអគ្គិសនីឧស្សាហកម្ម





ការប្រឹក្សាសារតាមអ៊ីនធឺណិត
បន្ថែមមតិ៖