
One Circuit, Three Decisions: A Selection Framework for AuCyan™, AuCarb™ and AuLeach™
Leaching, adsorption and the Non-Hazardous alternative are three separate decisions. Making them against one set of test conditions is what keeps the numbers comparable.
United Chemical is a manufacturer and global supplier of gold extraction chemicals, delivering AuCyan™ Natriumzyanid NaCN (≥98.3%), AuCarb™ Gold Recovery Kokosnossschuel Aktivkuel (≥99% Härte) an AuLeach™ Gold Auslaugmëttel (GDA) – Net geféierlech to mining operations in more than 77 countries. The three products sit at three different decision points in one flowsheet: dissolution, adsorption, and the alternative leach route when the permit chain is the binding constraint. Selecting them from one manufacturer means one set of test conditions, one documentation standard and one freight plan.
Schlëssel
- Three decisions, not one purchase. Leaching chemistry, adsorption media and the common-chemical alternative each have their own governing variables.
- AuCyan™ sets the dissolution benchmark at ≥98.3% NaCN in briquette form, with UN 1689 Class 6.1 documentation required.
- AuCarb™ governs recovery through hardness ≥99%, attrition ≤1.5%, a 6×12 mesh cut and the K/R pair across four grades.
- AuLeach™ removes a logistics constraint as a Non-Hazardous common-chemical route, but still needs ore-specific pH and dosage validation.
- One supplier makes the data comparable: one test protocol, batch COA / TDS / MSDS per lot, one FOB or CIF freight plan.
- Free laboratory test samples are available for AuCarb™ and AuLeach™ to start validation before an FCL order.
| Decisioun | Produit | Schlësselspezifikatioun | MOQ |
|---|---|---|---|
| Dissolution / leaching | AuCyan™ Natriumzyanid NaCN (≥98.3%) | Briquette, GB/T 19306-2003, low NaOH / Na₂CO₃ / insolubles; UN 1689 Class 6.1, EUC required | 18 MT |
| Adsorption / recovery | AuCarb™ Gold Recovery Kokosnossschuel Aktivkuel (≥99% Härte) | 6×12 mesh, attrition ≤1.5%, platelet ≤5.0%, K ≥26 kg/t / R ≥50% on AC50; 25 kg heavy-duty laminated PE bags | 15 MT |
| Alternative leach route | AuLeach™ Gold Auslaugmëttel (GDA) – Net geféierlech | Common chemical, pH 10.5–12, indicative dosage 0.5–1.0 ‰, general cargo | 28 MT |
All three are supplied factory-direct under FOB or CIF terms with batch COA, TDS and MSDS. Contact: info@unitedchemicalcn.com · WhatsApp +86 173 9270 5576 · https://unitedchemicalcn.com/
1. Three products, three different questions
A gold recovery circuit is a chain of unit operations. The leaching reagent answers the question "how fast and how completely does gold leave the ore". The activated Carbon answers "how much of that dissolved gold do we actually capture and keep". The alternative leach route answers "what happens if the permit chain, not the metallurgy, is what stops the project". These are not competing products; they occupy three different stages of the same flowsheet.
Confusing them creates bad procurement. Buying a higher-K carbon will not fix a dissolution problem. Raising the Cyanid set-point will not fix a rate-limited adsorption stage. Switching to a common-chemical reagent will not remove the need for carbon. A selection framework keeps each decision attached to its own measured variable.
2. Tutorial: a six-step selection framework
- Define the flowsheet first. CIP, CIL, CIC, Heap leaching or Vat leaching — the circuit determines which stages exist and which products are needed at all.
- Characterise the ore. Head grade, mineralogy, clay, sulphide, arsenic and grind size set the dissolution demand. Run a bottle roll or column curve per feed.
- Resolve the permit question. If UN 1689 Class 6.1 documentation and an End-User Certificate can be closed on schedule, AuCyan™ Sodium Cyanide NaCN (≥98.3%) is the dissolution benchmark. If the permit chain binds, evaluate AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous against the same ore.
- Size the adsorption stage. From solution tenor and residence time, choose the carbon grade by K/R value: BC1100 for Heap / CIC, AC50 for standard CIP/CIL, AC55 or AC60 for higher-throughput or high-shear duty.
- Een Dokumentatiounsstandard fixéieren. Batch COA, TDS and MSDS per lot, one acceptance band, one sampling routine, and plant logs tied to lot numbers.
- Erstellt de Liwwerkalenner against the campaign or ramp curve using the 15 / 18 / 28 MT minimum order quantities, under FOB or CIF terms, with the documentation gate ahead of the first production slot.
The framework is deliberately sequential: changing the answer to step 1 or step 3 changes everything downstream. It is also reusable — the same six steps apply to a new country page, a brownfield expansion or a first-time enquiry.
3. Grade ladder and specification detail
| AuCarb™ grade | Duty | Parameteren definéieren |
|---|---|---|
| BC1100 | Heap leaching / CIC | Hardness ≥98.5%, long contact, lower shear |
| AC50 | Standard CIP / CIL | K ≥26 kg/t, R ≥50%, CTC ≥50%, Butane ≥19.5%, ash ≤3.0% |
| AC55 | Higher-throughput CIL | K ≥28 kg/t, R ≥55% |
| AC60 | High-shear / high-tenor | K ≥30 kg/t, R ≥60%, 8×16 or 6×12 |
AC50 shared parameters: 6×12 mesh, ball-pan hardness ≥99%, A.A.R.L. attrition ≤1.5%, platelet ≤5.0%, moisture ≤5.0%, bulk density 0.48–0.55 g/ml, CAS 7440-44-0, HS 3802.10. An iodine figure is not published pending a single confirmed value; CTC and Butane activity are the stated pore indicators.
4. Why one supplier changes the data quality
Sourcing all three from one manufacturer makes the numbers comparable: one set of test conditions, one documentation standard and one freight plan. When a plant deviation appears, the operator can separate ore effects from delivery effects because every lot carries its own COA, TDS and MSDS and every campaign is logged against a lot number. With three suppliers and three test protocols, the same deviation is usually argued about rather than diagnosed.
5. Tabelle fir d'Léisung vu Problemer
| Symptom | Wrong decision to make | Correct check |
|---|---|---|
| Lues Opléisung | Buy higher-K carbon | Oxygen transfer, pH, free cyanide, grind |
| Gold an der Léisung an der leschter Phas | Raise cyanide dosage | Carbon concentration, R value, residence time |
| Permit chain blocks the campaign | Wait and re-order | Validate AuLeach™ Non-Hazardous route on same ore |
| Kuelestoffzusammensetzung iwwer dem Design | Change leaching reagent | Attrition ≤1.5%, screen aperture, circulation |
| Deviation cannot be attributed | Adjust all set-points | Ore blend first, then batch COA, then set-point |
6. Oft gestallten Froen
Q1. What does United Chemical Fabrikatioun?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, supplied to mining operations in more than 77 countries.
Q2. Are the three products alternatives to each other?
No. They occupy three different stages: dissolution, adsorption, and the alternative leach route when the permit chain binds.
Q3. Which product needs an End-User Certificate?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), as UN 1689 Class 6.1 dangerous goods, together with verified destination import permits.
Q4. Which product ships as general cargo?
AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, a common chemical; the buyer still confirms local common-chemical import rules.
Q5. Wat sinn déi minimal Bestellquantitéiten?
15 MT fir AuCarb™, 18 MT fir AuCyan™, 28 MT fir AuLeach™, all pro 1×20' FCL.
Q6. Which Incoterms are available?
FOB- oder CIF-Konditioune gëllen.
Q7. Which carbon grade suits a standard CIL circuit?
AC50, the engineering grade for standard CIP/CIL duty, with K ≥26 kg/t and R ≥50%.
Q8. Wéi ass AuCarb™ verpackt?
In 25 kg heavy-duty laminated PE bags with moisture ≤5.0% as packed.
Q9. Can test samples be provided?
Yes — free laboratory test samples are available for AuCarb™ and AuLeach™ for ore-specific validation before an FCL order.
Q10. What documents come with each lot?
Batch-COA, TDS an MSDS, géint eng Liwwernummer agereecht, sou datt Ofwäichunge verfollegbar sinn.
Q11. What is the first step in selecting reagents for a new project?
Define the flowsheet (CIP, CIL, CIC, Heap leaching or Vat leaching), then characterise the ore with a bottle roll or column curve.
Q12. Why source all three from one manufacturer?
One set of test conditions, one documentation standard and one freight plan make plant deviations diagnosable and reduce qualification work.
7. Technical reading and internal links
Iwwersiicht vum Gëllene Dräieck · Techneschen Iwwerbléck iwwer dräi Produkter · AuCyan™ · Sodium cyanide reference · AuCarb™ Guide · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Leaching reagents · Chemesch FAQs · Industrie Kleng Annonce
Request a quotation, TDS, batch COA or laboratory samples: Kontaktéiert eis · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Zoufälleg Inhalt
- Hot Inhalt
- Hot review Inhalt
- Ammoniumchlorid 99.5% Minière Collector
- 99.5% min Ammoniumchlorid Fir industriell Notzung
- Kalziumperoxid 60% Assay gielzeg Tablett
- Industriell Essigsäure 99.5% Faarflos Flësseg Glacial Essigsäure
- Featured Produkter Natriumcyanid
- Kupfersulfat Monohydrat (CuSO4-H2O) Pulver (Cu: 34% Min)
- Wéi wielen ech de richtege Flotatiounsreagens?
- 1Discounted Sodium Cyanide (CAS: 143-33-9) fir Biergbau - Héich Qualitéit & Kompetitiv Präisser
- 2Natriumzyanid 98.3% CAS 143-33-9 NaCN Goldverpackungsmëttel essentiell fir d'Biergbauchemieindustrie
- 3China's Nei Reglementer iwwer Natriumcyanid Exporter a Leedung fir International Keefer
- 4Sodium Cyanide (CAS: 143-33-9) Endbenutzer Zertifikat (Chinesesch an Englesch Versioun)
- 5International Cyanide (Sodium Cyanide) Management Code - Gold Mine Akzeptanz Standarden
- 6China Fabréck Schwefelsäure 98%
- 7Waasserfräi Oxalsäure 99.6% Industriegrad
- 1Natriumzyanid 98.3% CAS 143-33-9 NaCN Goldverpackungsmëttel essentiell fir d'Biergbauchemieindustrie
- 2Héich Rengheet · Stabil Leeschtung · Méi héich Erhuelung — Natriumzyanid fir modern Goldaulaugung
- 3United ChemicalD'Fuerschungsteam weist Autoritéit duerch datenorientéiert Erkenntnesser
- 4AuCyan™ Héichleistungs-Natriumzyanid | 98.3% Rengheet fir de globale Goldofbau
- 5Digital Elektronesch Detonator (Verzögerungszäit 0 ~ 16000ms)
- 6Héichstäerkt, Héichpräzis Shock Tube Detonator
- 7Industrie elektresch Detonator






Online Message Consultatioun
Kommentar bäidroen: