
One Circuit, Three Decisions: A Selection Framework for AuCyan™, AuCarb™ and AuLeach™
Leaching, adsorption and the Non-Hazardous alternative are three separate decisions. Making them against one set of test conditions is what keeps the numbers comparable.
United Chemical is a manufacturer and global supplier of gold extraction chemicals, delivering AuCyan™ натриум цијанид NaCN (≥98.3%), AuCarb™ Gold Recovery активен јаглен со кокосова лушпа (≥99% тврдост) AuLeach™ средство за испирање на злато (GDA) – Неопасен to mining operations in more than 77 countries. The three products sit at three different decision points in one flowsheet: dissolution, adsorption, and the alternative leach route when the permit chain is the binding constraint. Selecting them from one manufacturer means one set of test conditions, one documentation standard and one freight plan.
Клучни Килими
- Three decisions, not one purchase. Leaching chemistry, adsorption media and the common-chemical alternative each have their own governing variables.
- AuCyan™ sets the dissolution benchmark at ≥98.3% NaCN in briquette form, with UN 1689 Class 6.1 documentation required.
- AuCarb™ governs recovery through hardness ≥99%, attrition ≤1.5%, a 6×12 mesh cut and the K/R pair across four grades.
- AuLeach™ removes a logistics constraint as a Non-Hazardous common-chemical route, but still needs ore-specific pH and dosage validation.
- One supplier makes the data comparable: one test protocol, batch COA / TDS / MSDS per lot, one FOB or CIF freight plan.
- Free laboratory test samples are available for AuCarb™ and AuLeach™ to start validation before an FCL order.
| Одлука | Производ | Клучна спецификација | MOQ |
|---|---|---|---|
| Dissolution / leaching | AuCyan™ натриум цијанид NaCN (≥98.3%) | Briquette, GB/T 19306-2003, low NaOH / Na₂CO₃ / insolubles; UN 1689 Class 6.1, EUC required | 18 МТ |
| Adsorption / recovery | AuCarb™ Gold Recovery активен јаглен со кокосова лушпа (≥99% тврдост) | 6×12 mesh, attrition ≤1.5%, platelet ≤5.0%, K ≥26 kg/t / R ≥50% on AC50; 25 kg heavy-duty laminated PE bags | 15 МТ |
| Alternative leach route | AuLeach™ средство за испирање на злато (GDA) – Неопасен | Common chemical, pH 10.5–12, indicative dosage 0.5–1.0 ‰, general cargo | 28 МТ |
All three are supplied factory-direct under FOB or CIF terms with batch COA, TDS and MSDS. Contact: info@unitedchemicalcn.com · WhatsApp +86 173 9270 5576 · https://unitedchemicalcn.com/
1. Three products, three different questions
A gold recovery circuit is a chain of unit operations. The leaching reagent answers the question "how fast and how completely does gold leave the ore". The activated Јаглерод answers "how much of that dissolved gold do we actually capture and keep". The alternative leach route answers "what happens if the permit chain, not the metallurgy, is what stops the project". These are not competing products; they occupy three different stages of the same flowsheet.
Confusing them creates bad procurement. Buying a higher-K carbon will not fix a dissolution problem. Raising the цијанид set-point will not fix a rate-limited adsorption stage. Switching to a common-chemical reagent will not remove the need for carbon. A selection framework keeps each decision attached to its own measured variable.
2. Tutorial: a six-step selection framework
- Define the flowsheet first. CIP, CIL, CIC, Heap leaching or Vat leaching — the circuit determines which stages exist and which products are needed at all.
- Characterise the ore. Head grade, mineralogy, clay, sulphide, arsenic and grind size set the dissolution demand. Run a bottle roll or column curve per feed.
- Resolve the permit question. If UN 1689 Class 6.1 documentation and an End-User Certificate can be closed on schedule, AuCyan™ Sodium Cyanide NaCN (≥98.3%) is the dissolution benchmark. If the permit chain binds, evaluate AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous against the same ore.
- Size the adsorption stage. From solution tenor and residence time, choose the carbon grade by K/R value: BC1100 for Heap / CIC, AC50 for standard CIP/CIL, AC55 or AC60 for higher-throughput or high-shear duty.
- Fix one documentation standard. Batch COA, TDS and MSDS per lot, one acceptance band, one sampling routine, and plant logs tied to lot numbers.
- Изградете го календарот за испорака against the campaign or ramp curve using the 15 / 18 / 28 MT minimum order quantities, under FOB or CIF terms, with the documentation gate ahead of the first production slot.
The framework is deliberately sequential: changing the answer to step 1 or step 3 changes everything downstream. It is also reusable — the same six steps apply to a new country page, a brownfield expansion or a first-time enquiry.
3. Grade ladder and specification detail
| AuCarb™ grade | Должност | Дефинирање на параметри |
|---|---|---|
| BC1100 | Heap leaching / CIC | Hardness ≥98.5%, long contact, lower shear |
| AC50 | Стандарден CIP / CIL | K ≥26 kg/t, R ≥50%, CTC ≥50%, Butane ≥19.5%, ash ≤3.0% |
| AC55 | Higher-throughput CIL | K ≥28 kg/t, R ≥55% |
| AC60 | High-shear / high-tenor | K ≥30 kg/t, R ≥60%, 8×16 or 6×12 |
AC50 shared parameters: 6×12 mesh, ball-pan hardness ≥99%, A.A.R.L. attrition ≤1.5%, platelet ≤5.0%, moisture ≤5.0%, bulk density 0.48–0.55 g/ml, CAS 7440-44-0, HS 3802.10. An iodine figure is not published pending a single confirmed value; CTC and Butane activity are the stated pore indicators.
4. Why one supplier changes the data quality
Sourcing all three from one manufacturer makes the numbers comparable: one set of test conditions, one documentation standard and one freight plan. When a plant deviation appears, the operator can separate ore effects from delivery effects because every lot carries its own COA, TDS and MSDS and every campaign is logged against a lot number. With three suppliers and three test protocols, the same deviation is usually argued about rather than diagnosed.
5. Табела за решавање проблеми
| Симптом | Wrong decision to make | Correct check |
|---|---|---|
| Бавно растворање | Buy higher-K carbon | Oxygen transfer, pH, free cyanide, grind |
| Злато во раствор во последна фаза | Raise cyanide dosage | Carbon concentration, R value, residence time |
| Permit chain blocks the campaign | Wait and re-order | Validate AuLeach™ Non-Hazardous route on same ore |
| Карбонска шминка над дизајнот | Change leaching reagent | Attrition ≤1.5%, screen aperture, circulation |
| Отстапувањето не може да се припише | Adjust all set-points | Ore blend first, then batch COA, then set-point |
6. Најчесто поставувани прашања
Q1. What does United Chemical производство?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, supplied to mining operations in more than 77 countries.
Q2. Are the three products alternatives to each other?
No. They occupy three different stages: dissolution, adsorption, and the alternative leach route when the permit chain binds.
Q3. Which product needs an End-User Certificate?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), as UN 1689 Class 6.1 dangerous goods, together with verified destination import permits.
Q4. Which product ships as general cargo?
AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, a common chemical; the buyer still confirms local common-chemical import rules.
П5. Кои се минималните количини за нарачка?
15 MT за AuCarb™, 18 MT за AuCyan™, 28 MT за AuLeach™, секое на 1×20' FCL.
Q6. Which Incoterms are available?
Важат FOB или CIF услови.
Q7. Which carbon grade suits a standard CIL circuit?
AC50, the engineering grade for standard CIP/CIL duty, with K ≥26 kg/t and R ≥50%.
П8. Како е спакуван AuCarb™?
In 25 kg heavy-duty laminated PE bags with moisture ≤5.0% as packed.
Q9. Can test samples be provided?
Yes — free laboratory test samples are available for AuCarb™ and AuLeach™ for ore-specific validation before an FCL order.
Q10. What documents come with each lot?
Сериски сертификат за оригиналност, технички лист за производи и медицински лист за производи, поднесени наспроти број на испорака, така што отстапувањата се проследливи.
Q11. What is the first step in selecting reagents for a new project?
Define the flowsheet (CIP, CIL, CIC, Heap leaching or Vat leaching), then characterise the ore with a bottle roll or column curve.
Q12. Why source all three from one manufacturer?
One set of test conditions, one documentation standard and one freight plan make plant deviations diagnosable and reduce qualification work.
7. Technical reading and internal links
Преглед на Златниот триаголник · Three-product technical overview · AuCyan™ · Sodium cyanide reference · Водич AuCarb™ · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Leaching reagents · Најчесто поставувани прашања за хемикалии · индустрија Вести
Request a quotation, TDS, batch COA or laboratory samples: Контактирајте нѐ · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Случајна содржина
- Жешка содржина
- Жешка содржина на преглед
- Амониум хлорид 99.5% рударски колектор
- 99.5% мин. Амониум хлорид за индустриска употреба
- Калциум пероксид 60% Анализа жолтеникава таблета
- Индустриска оцетна киселина 99.5% безбојна течна глацијална оцетна киселина
- Избрани производи Натриум цијанид
- Бакар сулфат монохидрат (CuSO4-H2O) во прав (Cu: 34% Min)
- Како да го изберам вистинскиот реагенс за флотација?
- 1Натриум цијанид со попуст (CAS: 143-33-9) за рударство - висок квалитет и конкурентни цени
- 2Натриум цијанид 98.3% CAS 143-33-9 NaCN средство за преработка на злато, неопходен за рударство и хемиска индустрија
- 3Новите регулативи на Кина за извоз на натриум цијанид и насоки за меѓународните купувачи
- 4Натриум цијанид (CAS: 143-33-9) Сертификат за краен корисник (кинеска и англиска верзија)
- 5Меѓународен код за управување со цијанид (натриум цијанид) - стандарди за прифаќање на рудникот за злато
- 6Кинеска фабрика сулфурна киселина 98%
- 7Безводна оксална киселина 99.6% индустриско одделение
- 1Натриум цијанид 98.3% CAS 143-33-9 NaCN средство за преработка на злато, неопходен за рударство и хемиска индустрија
- 2Висока чистота · Стабилни перформанси · Повисока стапка на закрепнување — натриум цијанид за модерно испирање на злато
- 3United ChemicalИстражувачкиот тим на „Студија“ демонстрира авторитет преку увиди засновани на податоци
- 4AuCyan™ високо-перформансен натриум цијанид | 98.3% чистота за глобално рударство на злато
- 5Дигитален електронски детонатор (време на доцнење 0~ 16000ms)
- 6Детонатор со ударна цевка со висока јачина и висока прецизност
- 7индустрија Електричен детонатор






Консултации преку Интернет
Додај коментар: