
A Plant-Level Method for Turning Reagent Efficiency Into Margin
A rising gold price hides a lot of operational drift. The reagent line is one of the few costs a plant can measure and move.
AngloGold Ashanti's Q3 2026 update gives a clear read on gold mining economics at current prices: average realised price US$4,239/oz against US$3,490/oz a year earlier, and all-in sustaining cost US$2,170/oz against US$1,720/oz. Prices rose faster than costs, but royalties, fuel and capital intensity all climbed. For a plant operator, the useful response is not a macro view — it is a method that converts reagent efficiency into a cost-per-ounce figure that can be compared with the AISC line.
Poin-poin utama
- Realised price rose 21% year on year to US$4,239/oz from US$3,490/oz.
- AISC rose too: US$2,170/oz against US$1,720/oz, driven by price-linked royalties, fuel and capital intensity.
- Production fell to 696,000 oz from 768,000 oz, so cost per ounce absorbed fixed cost over fewer ounces.
- Free cash flow fell to US$722 million from US$920 million as capital expenditure climbed to US$563 million from US$388 million.
- Reagent efficiency is measurable. Side reactions, over-dosing and Carbon fines are three loss channels that can be quantified in kg/t and converted to cost per ounce.
- Do not let price mask drift. A high gold price makes a rising consumption trend easy to ignore until the cycle turns.
| metrik | Q3 2026 | Q3 2025 |
|---|---|---|
| Harga emas direalisasikan | AS$4,239/oz | AS$3,490/oz |
| AISC | AS$2,170/oz | AS$1,720/oz |
| EBITDA | AS$1,568j | AS$1,400j |
| pengeluaran | 696,000 oz | 768,000 oz |
| Aliran tunai percuma | AS$722j | AS$920j |
| Perbelanjaan modal | AS$563j | AS$388j |
Price-linked royalties added to unit costs over the period. Source: company Q3 2026 update, 5 November 2026. All figures above are disclosed company numbers; no plant cost figures have been estimated by the publisher.
1. Why a rising price is a poor excuse for drifting consumption
When realised price rises 21% year on year, a plant can absorb a meaningful increase in unit cost and still report a healthy margin. That is precisely the condition in which operational discipline slips: over-dosing becomes invisible, carbon make-up is written off as routine, and a rising reagent spend per tonne is attributed to ore rather than measured.
The Q3 2026 numbers show why that is risky. AISC rose US$450/oz while production fell from 768,000 oz to 696,000 oz, so fixed cost was spread over fewer ounces. Free cash flow fell even as EBITDA rose, because capital expenditure climbed from US$388 million to US$563 million. Price-linked royalties, fuel and capital intensity are largely outside a plant metallurgist's control; reagent efficiency is not.
2. Three reagent loss channels worth quantifying
2.1 Side reactions and impurity demand
Excess NaOH and Na₂CO₃, copper and arsenic minerals and high insolubles all consume reagent without dissolving gold. A high-purity NaCN briquette with low insolubles narrows that loss, and the batch COA is the reference for measuring it.
2.2 Over-dosing after the dissolution plateau
A flat continuous feed wastes reagent in the final hours of a leach, when the dissolution curve has flattened. A front-loaded, tapered dosing profile built from a bottle roll curve removes that spend without changing recovery.
2.3 Carbon fines carrying loaded gold
Fines generated above the ≤1.5% attrition design limit leave the circuit already loaded. The loss shows up as a gap between dissolved and recovered gold, not as a reagent invoice — which is why it is usually underestimated.
3. Tutorial: six steps from reagent efficiency to margin per ounce
- Establish a cost-per-tonne baseline. From plant logs, compute reagent spend per tonne of ore treated for a defined period, broken down by leaching reagent and carbon make-up.
- Decompose the three loss channels. Estimate the kg/t attributable to side reactions, to over-dosing after plateau, and to carbon fines carrying gold. Use measured titration and carbon inventory data, not assumptions.
- Compute the recoverable saving per tonne. Apply your own delivered reagent cost to the avoidable kg/t. Keep this separate from the gold value of recovered fines.
- Convert to cost per ounce. Divide the saving per tonne by recovered grade times metallurgical recovery to express it in currency per ounce, on the same basis as AISC.
- Compare with the AISC movement. Set the result against the US$450/oz year-on-year AISC increase. This tells you what share of cost pressure is addressable inside the circuit.
- Lock the gains with documentation. Batch COA, TDS and MSDS per lot, a fixed dosing profile, a defined free-sianida or residual-reagent titration routine, and a carbon attrition target at ≤1.5%.
The method uses your own measured inputs. Published market figures set the context; they are not substitutes for plant data.
4. Jadual penyelesaian masalah
| Gejala | Kemungkinan punca | Pemeriksaan pertama |
|---|---|---|
| Reagent spend per tonne rising | Side reactions or flat dosing profile | COA impurity figures, titration log, dissolution curve |
| High residual reagent in tails | Dosing continues after plateau | Addition profile, titration frequency |
| Dissolved versus recovered gold gap | Loaded carbon fines leaving circuit | Attrition against ≤1.5%, tails assay, screen aperture |
| Cost per ounce worse with fewer ounces | Fixed cost over lower production | Throughput, grade, recovery |
| Deviation cannot be attributed | Lot not linked to plant log | COA filing, sampling routine |
5. Where the three products act on the cost line
| Loss channel | Produk | Mengawal |
|---|---|---|
| Impurity-driven side reactions | Natrium Sianida AuCyan™ NaCN (≥98.3%) | Low NaOH / Na₂CO₃ / insolubles; batch COA |
| Loaded-gold loss to fines | Karbon Aktif Tempurung Kelapa Pemulihan Emas AuCarb™ (Kekerasan ≥99%) | Attrition ≤1.5%, 6×12 mesh, platelet ≤5.0% |
| Permit-driven schedule cost | Agen Pelarutan Emas AuLeach™ (GDA) – Tidak Berbahaya | General-cargo route, pH 10.5–12 validation |
United Chemical supplies all three factory-direct under FOB or CIF terms with batch COA, TDS and MSDS, serving mining operations in more than 77 countries at 15 / 18 / 28 MT minimum order quantities per 1×20' FCL.
6. Soalan-soalan yang kerap ditanya
Q1. What was the Q3 2026 realised gold price?
US$4,239/oz, up from US$3,490/oz a year earlier — a 21% increase.
Q2. What was the Q3 2026 AISC?
US$2,170/oz against US$1,720/oz in Q3 2025.
Q3. Did production rise with the price?
No. Production was 696,000 oz against 768,000 oz a year earlier, so fixed cost was spread over fewer ounces.
Q4. Why did free cash flow fall while EBITDA rose?
Capital expenditure climbed to US$563 million from US$388 million, taking free cash flow to US$722 million from US$920 million.
Q5. Which cost drivers are outside plant control?
Price-linked royalties, fuel and capital intensity. Reagent efficiency is one of the few variables a plant team can measure and move.
Q6. What are the three reagent loss channels?
Impurity-driven side reactions, over-dosing after the dissolution plateau, and carbon fines carrying loaded gold.
Q7. How do you express a reagent saving on the same basis as AISC?
Compute the avoiding cost per tonne of ore, then divide by recovered grade times metallurgical recovery to get a currency-per-ounce figure.
Q8. Which product controls impurity-driven side reactions?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), with controlled NaOH, Na₂CO₃ and ultra-low insolubles verified against the batch COA.
Q9. Which carbon parameter limits gold loss to fines?
Attrition ≤1.5% on AC50, together with ≥99% hardness, a 6×12 mesh cut and platelet ≤5.0%.
S10. Incoterms yang manakah terpakai?
Tertakluk pada terma FOB atau CIF.
Q11. Can published market figures replace plant data in the calculation?
No. Grade, recovery, kg/t consumption and delivered reagent cost must come from plant logs; market figures only set the context.
Q12. Where can the specifications be reviewed?
On the AuCyan™, AuCarb™ and AuLeach™ technical pages linked below, with batch COA, TDS and MSDS per lot.
7. Sumber dan pautan dalaman
Panduan AuCyan™ · AuCarb™ · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Segi Tiga Emas · Gambaran keseluruhan tiga produk · Soalan Lazim Kimia · Berita Industri · Hubungi Kami
Source note: company figures are drawn from the Q3 2026 update dated 5 November 2026. Reagent specifications are United Chemical product data. The calculation is a method using plant-supplied inputs.
Hubungi Kami · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Kandungan Rawak
- Kandungan panas
- Kandungan ulasan hangat
- Pakar Perhubungan Pelanggan dan Pembekal Fleksibel (Lokasi: India)
- Detonator Elektrik Magneto(Arus sesat anti)
- Akrilamida
- Natrium Glukonat untuk Rawatan Air
- United Chemical, Perlombongan TuXingSun dan Lombong Emas Henan Lingbao Bersama-sama Menubuhkan Lombong Tanpa Sianida
- Mengemudi Perubahan: Hala Tuju Masa Depan Industri Kimia
- Bahan kimia manakah yang paling menghakis?
- 1Sodium Cyanide Diskaun (CAS: 143-33-9) untuk Perlombongan - Harga Berkualiti Tinggi & Berdaya saing
- 2Natrium Sianida 98.3% CAS 143-33-9 NaCN agen pembalut emas Penting untuk Industri Kimia Perlombongan
- 3Peraturan Baru China mengenai Eksport Natrium Sianida dan Panduan untuk Pembeli Antarabangsa
- 4Sodium Cyanide (CAS: 143-33-9) Sijil pengguna akhir (versi Cina dan Inggeris)
- 5Kod Pengurusan Sianida(Natrium sianida) Antarabangsa - Piawaian Penerimaan Lombong Emas
- 6Asid Sulfurik kilang China 98%
- 7Asid Oksalik kontang 99.6% Gred Perindustrian
- 1Natrium Sianida 98.3% CAS 143-33-9 NaCN agen pembalut emas Penting untuk Industri Kimia Perlombongan
- 2Ketulenan Tinggi · Prestasi Stabil · Pemulihan Lebih Tinggi — natrium sianida untuk larut lesap emas moden
- 3United ChemicalPasukan Penyelidik Menunjukkan Kewibawaan Melalui Cerapan Terpacu Data
- 4Natrium Sianida Berprestasi Tinggi AuCyan™ | Ketulenan 98.3% untuk Perlombongan Emas Global
- 5Detonator Elektronik Digital(Masa kelewatan 0~ 16000ms)
- 6Detonator Tiub Kejutan berketepatan tinggi, berketepatan tinggi
- 7industri Electric Detonator






Perundingan mesej dalam talian
Tambah komen: