
One Circuit, Three Decisions: A Selection Framework for AuCyan™, AuCarb™ and AuLeach™
Leaching, adsorption and the Non-Hazardous alternative are three separate decisions. Making them against one set of test conditions is what keeps the numbers comparable.
United Chemical is a manufacturer and global supplier of gold extraction chemicals, delivering AuCyan™ سوډیم سیانایډ NaCN (≥98.3%), د AuCarb™ سرو زرو بیا رغونه د ناریل خولۍ فعال کاربن (≥99٪ سختۍ) او AuLeach™ د سرو زرو د لیچ کولو اجنټ (GDA) - غیر خطرناک to mining operations in more than 77 countries. The three products sit at three different decision points in one flowsheet: dissolution, adsorption, and the alternative leach route when the permit chain is the binding constraint. Selecting them from one manufacturer means one set of test conditions, one documentation standard and one freight plan.
کلیدي ټکي
- Three decisions, not one purchase. Leaching chemistry, adsorption media and the common-chemical alternative each have their own governing variables.
- AuCyan™ sets the dissolution benchmark at ≥98.3% NaCN in briquette form, with UN 1689 Class 6.1 documentation required.
- AuCarb™ governs recovery through hardness ≥99%, attrition ≤1.5%, a 6×12 mesh cut and the K/R pair across four grades.
- AuLeach™ removes a logistics constraint as a Non-Hazardous common-chemical route, but still needs ore-specific pH and dosage validation.
- One supplier makes the data comparable: one test protocol, batch COA / TDS / MSDS per lot, one FOB or CIF freight plan.
- Free laboratory test samples are available for AuCarb™ and AuLeach™ to start validation before an FCL order.
| د پریکړې | د محصول د | کلیدي مشخصات | MOQ |
|---|---|---|---|
| Dissolution / leaching | AuCyan™ سوډیم سیانایډ NaCN (≥98.3%) | Briquette, GB/T 19306-2003, low NaOH / Na₂CO₃ / insolubles; UN 1689 Class 6.1, EUC required | 18 MT |
| Adsorption / recovery | د AuCarb™ سرو زرو بیا رغونه د ناریل خولۍ فعال کاربن (≥99٪ سختۍ) | 6×12 mesh, attrition ≤1.5%, platelet ≤5.0%, K ≥26 kg/t / R ≥50% on AC50; 25 kg heavy-duty laminated PE bags | 15 MT |
| Alternative leach route | AuLeach™ د سرو زرو د لیچ کولو اجنټ (GDA) - غیر خطرناک | Common chemical, pH 10.5–12, indicative dosage 0.5–1.0 ‰, general cargo | 28 MT |
All three are supplied factory-direct under FOB or CIF terms with batch COA, TDS and MSDS. Contact: info@unitedchemicalcn.com · WhatsApp +86 173 9270 5576 · https://unitedchemicalcn.com/
1. Three products, three different questions
A gold recovery circuit is a chain of unit operations. The leaching reagent answers the question "how fast and how completely does gold leave the ore". The activated کاربن answers "how much of that dissolved gold do we actually capture and keep". The alternative leach route answers "what happens if the permit chain, not the metallurgy, is what stops the project". These are not competing products; they occupy three different stages of the same flowsheet.
Confusing them creates bad procurement. Buying a higher-K carbon will not fix a dissolution problem. Raising the ساینایډ set-point will not fix a rate-limited adsorption stage. Switching to a common-chemical reagent will not remove the need for carbon. A selection framework keeps each decision attached to its own measured variable.
2. Tutorial: a six-step selection framework
- Define the flowsheet first. CIP, CIL, CIC, Heap leaching or Vat leaching — the circuit determines which stages exist and which products are needed at all.
- Characterise the ore. Head grade, mineralogy, clay, sulphide, arsenic and grind size set the dissolution demand. Run a bottle roll or column curve per feed.
- Resolve the permit question. If UN 1689 Class 6.1 documentation and an End-User Certificate can be closed on schedule, AuCyan™ Sodium Cyanide NaCN (≥98.3%) is the dissolution benchmark. If the permit chain binds, evaluate AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous against the same ore.
- Size the adsorption stage. From solution tenor and residence time, choose the carbon grade by K/R value: BC1100 for Heap / CIC, AC50 for standard CIP/CIL, AC55 or AC60 for higher-throughput or high-shear duty.
- Fix one documentation standard. Batch COA, TDS and MSDS per lot, one acceptance band, one sampling routine, and plant logs tied to lot numbers.
- Build the delivery calendar against the campaign or ramp curve using the 15 / 18 / 28 MT minimum order quantities, under FOB or CIF terms, with the documentation gate ahead of the first production slot.
The framework is deliberately sequential: changing the answer to step 1 or step 3 changes everything downstream. It is also reusable — the same six steps apply to a new country page, a brownfield expansion or a first-time enquiry.
3. Grade ladder and specification detail
| AuCarb™ grade | دنده | د پیرامیټونو تعریف کول |
|---|---|---|
| BC1100 | Heap leaching / CIC | Hardness ≥98.5%, long contact, lower shear |
| AC50 | معیاري CIP / CIL | K ≥26 kg/t, R ≥50%, CTC ≥50%, Butane ≥19.5%, ash ≤3.0% |
| AC55 | Higher-throughput CIL | K ≥28 kg/t, R ≥55% |
| AC60 | High-shear / high-tenor | K ≥30 kg/t, R ≥60%, 8×16 or 6×12 |
AC50 shared parameters: 6×12 mesh, ball-pan hardness ≥99%, A.A.R.L. attrition ≤1.5%, platelet ≤5.0%, moisture ≤5.0%, bulk density 0.48–0.55 g/ml, CAS 7440-44-0, HS 3802.10. An iodine figure is not published pending a single confirmed value; CTC and Butane activity are the stated pore indicators.
4. Why one supplier changes the data quality
Sourcing all three from one manufacturer makes the numbers comparable: one set of test conditions, one documentation standard and one freight plan. When a plant deviation appears, the operator can separate ore effects from delivery effects because every lot carries its own COA, TDS and MSDS and every campaign is logged against a lot number. With three suppliers and three test protocols, the same deviation is usually argued about rather than diagnosed.
۴. د ستونزو د حل جدول
| علامه | Wrong decision to make | Correct check |
|---|---|---|
| ورو تحلیل | Buy higher-K carbon | Oxygen transfer, pH, free cyanide, grind |
| Gold in final-stage solution | Raise cyanide dosage | Carbon concentration, R value, residence time |
| Permit chain blocks the campaign | Wait and re-order | Validate AuLeach™ Non-Hazardous route on same ore |
| Carbon make-up above design | Change leaching reagent | Attrition ≤1.5%, screen aperture, circulation |
| انحراف نشي منسوب کیدی | Adjust all set-points | Ore blend first, then batch COA, then set-point |
6. پرله پسې پوښتل شوې پوښتنې
Q1. What does United Chemical تولید؟
AuCyan™ Sodium Cyanide NaCN (≥98.3%), AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, supplied to mining operations in more than 77 countries.
Q2. Are the three products alternatives to each other?
No. They occupy three different stages: dissolution, adsorption, and the alternative leach route when the permit chain binds.
Q3. Which product needs an End-User Certificate?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), as UN 1689 Class 6.1 dangerous goods, together with verified destination import permits.
Q4. Which product ships as general cargo?
AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, a common chemical; the buyer still confirms local common-chemical import rules.
Q5. What are the minimum order quantities?
15 MT for AuCarb™, 18 MT for AuCyan™, 28 MT for AuLeach™, each per 1×20' FCL.
Q6. Which Incoterms are available?
د FOB یا CIF شرایط پلي کیږي.
Q7. Which carbon grade suits a standard CIL circuit?
AC50, the engineering grade for standard CIP/CIL duty, with K ≥26 kg/t and R ≥50%.
Q8. How is AuCarb™ packed?
In 25 kg heavy-duty laminated PE bags with moisture ≤5.0% as packed.
Q9. Can test samples be provided?
Yes — free laboratory test samples are available for AuCarb™ and AuLeach™ for ore-specific validation before an FCL order.
Q10. What documents come with each lot?
Batch COA, TDS and MSDS, filed against a delivery number so deviations are traceable.
Q11. What is the first step in selecting reagents for a new project?
Define the flowsheet (CIP, CIL, CIC, Heap leaching or Vat leaching), then characterise the ore with a bottle roll or column curve.
Q12. Why source all three from one manufacturer?
One set of test conditions, one documentation standard and one freight plan make plant deviations diagnosable and reduce qualification work.
7. Technical reading and internal links
د سرو زرو مثلث عمومي کتنه · Three-product technical overview · آوسیان™ · Sodium cyanide reference · د AuCarb™ لارښود · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Leaching reagents · د کیمیاوي موادو په اړه پوښتنې او ځوابونه · د صنعت د خبري اژانس
Request a quotation, TDS, batch COA or laboratory samples: موږ سره اړیکه ونیسئ · واټس اپ +۸۶ ۱۷۳ ۹۲۷۰ ۵۵۷۶ · info@unitedchemicalcn.com
- ناڅاپي منځپانګه
- ګرم مواد
- د ګرمې بیاکتنې منځپانګه
- امونیم کلورایډ ۹۹.۵٪ د کانونو راټولونکی
- د صنعتي استعمال لپاره ۹۹.۵٪ لږترلږه امونیم کلورایډ
- کلسیم پیرو اکسایډ 60٪ اسای ژیړ ټابلیټ
- صنعتي اسیتیک اسید ۹۹.۵٪ بې رنګه مایع ګلیشیل اسیتیک اسید
- د سوډیم سیانایډ ځانګړي محصولات
- د مسو سلفیټ مونوهایډریټ (CuSO4-H2O) پوډر (Cu:34% دقیقه)
- څنګه کولی شم د فلوټیشن ریجنټ سم انتخاب کړم؟
- 1د کانونو لپاره تخفیف شوی سوډیم سیانایډ (CAS: 143-33-9) - لوړ کیفیت او سیالي قیمت
- 2سوډیم سیانایډ ۹۸.۳٪ CAS ۱۴۳-۳۳-۹ د کانونو کیمیاوي صنعتونو لپاره اړین د سرو زرو پوښاک اجنټ NaCN
- 3د سوډیم سیانایډ صادراتو په اړه د چین نوي مقررات او د نړیوالو پیرودونکو لپاره لارښوونې
- 4سوډیم سیانایډ (CAS: 143-33-9) د پای کارونکي سند (چینایي او انګلیسي نسخه)
- 5د نړیوال ساینایډ (سوډیم ساینایډ) مدیریت کوډ - د سرو زرو کانونو د منلو معیارونه
- 6د چین فابریکه سلفوریک اسید ۹۸٪
- 7انهایډروس اکسلیک اسید ۹۹.۶٪ صنعتي درجه
- 1سوډیم سیانایډ ۹۸.۳٪ CAS ۱۴۳-۳۳-۹ د کانونو کیمیاوي صنعتونو لپاره اړین د سرو زرو پوښاک اجنټ NaCN
- 2لوړ پاکوالی · باثباته فعالیت · لوړ رغونه — د عصري سرو زرو د ایستلو لپاره سوډیم سیانایډ
- 3United Chemicalد څېړنې ټیم د معلوماتو پر بنسټ ولاړ بصیرتونو له لارې خپل واک څرګندوي
- 4AuCyan™ د لوړ فعالیت سوډیم سیانایډ | د سرو زرو نړیوال کان کیندنې لپاره 98.3٪ پاکوالی
- 5ډیجیټل الکترونیکي ډیټونټر (د ځنډ وخت 0 ~ 16000ms)
- 6لوړ ځواک، لوړ دقت شاک ټیوب ډیټونټر
- 7د صنعت برقي ډیټونټر






د آنلاین پیغام مشوره
نظر اضافه کړئ: