
AuCyan™ Sodium Cyanide NaCN (≥98.3%): A Technical Manual for Cyanidation Circuit Control
Dissolution chemistry, impurity-driven scaling, a seven-step dosing budget and permit-first scheduling — written for metallurgists and procurement teams running CIP, CIL, CIC, Heap leaching and Vat leaching circuits.
AuCyan™ Sodium Cyanide NaCN (≥98.3%) is a high-purity solid briquette leaching reagent for industrial gold dissolution. Three variables decide its real cost in a plant: how much of the assay reaches the ore as free سائینائڈ۔, how much reagent is lost to impurity-driven side reactions and کاربنate scaling, and whether the Class 6.1 documentation chain is scheduled before the production campaign begins. Purity above 98% is not a marketing number — it changes the mass balance of the entire circuit.
کلیدی لے لو
- Purity is a mass-balance input. At ≥98.3% NaCN, less of each tonne is inert carrier, so dosing calculations drift less between batches.
- Low NaOH and Na₂CO₃ reduce scaling. Controlled alkali limits carbonate deposition on pumps, pipelines, emitters and inter-stage screens where hard or saline water is recirculated.
- Insolubles at 0.02% protect dosing equipment. Ultra-low insoluble matter keeps solution make-up systems and heap emitters from plugging over a long campaign.
- Free cyanide must be measured, not assumed. A titration routine beats a fixed dosing rule whenever ore type, clay content or sulphide grade changes.
- Documentation gates production. UN 1689, Class 6.1, an End-User Certificate and verified import permits must be closed before the factory schedules the batch.
- The briquette form is a logistics decision. It survives maritime transit and inland temperature swings better than fine powder and keeps handling exposure lower at the plant.
پروڈکٹ: AuCyan™ Sodium Cyanide NaCN (≥98.3%) · Form: solid briquette · Benchmark: GB/T 19306-2003 superior grade · Transport: UN 1689, Class 6.1 dangerous goods · Documentation: End-User Certificate (EUC) plus destination import permit · Terms: FOB or CIF only · Minimum order: 18 MT per 1×20' FCL · Batch documents: COA, TDS, MSDS · Supply coverage: mining operations in more than 77 countries.
| ٹیسٹ شے | معیاری | عام (%) | یہ معاملہ کیوں ہے |
|---|---|---|---|
| NaCN | ≥ 98.0٪ | 98.3 | Free cyanide available per tonne |
| NaOH | ≤0.5٪ | 0.13٪ | Alkalinity without excess caustic |
| Na₂CO₃ | ≤0.5٪ | 0.18٪ | Carbonate scaling tendency |
| ناقابل حل | ≤0.05٪ | 0.02٪ | Dosing line and emitter blockage |
1. What purity actually changes in the dissolution circuit
Gold dissolution in an alkaline cyanide solution follows the Elsner relationship: 4Au + 8NaCN + O₂ + 2H₂O → 4Na[Au(CN)₂] + 4NaOH. The reaction needs three things at once — free cyanide, dissolved oxygen and a protective alkaline environment, typically pH 10.5–11.5. If any one is short, the others cannot compensate. This is why a plant can raise dosing and still see flat recovery: the limiting reagent may be oxygen transfer or pH stability rather than cyanide mass.
The assay figure decides how much of the delivered tonne participates in that reaction. A lower-grade product carries more inert salt and more alkali, so a dosing pump set from a nominal recipe under-delivers free cyanide. Operators then compensate by raising the set-point, which pushes excess reagent into side reactions with copper, iron, arsenic and sulphide minerals. Higher purity narrows that correction loop and makes the consumption curve predictable across batches.
In practice the difference shows up in three places: the dissolution rate in the first hours of leaching, the residual cyanide in the tailings stream, and the reagent spend per tonne of ore. All three are measurable, and all three should be tracked against the batch COA rather than against a generic datasheet.
2. Four failure modes driven by impurities
2.1 Excess alkali and pH drift
Free NaOH is needed to keep the circuit out of the acidic range where hydrogen cyanide can form, but excess caustic consumes reagent without dissolving gold and accelerates the precipitation of metal hydroxides that coat particle surfaces. A controlled NaOH level keeps alkalinity in band with less lime correction.
2.2 Carbonate scaling
Sodium carbonate builds up as cyanide degrades and as carbon dioxide enters with make-up water. In hard or saline recirculating water it deposits on impellers, pump casings, pipeline walls, heap emitters and carbon screens. Scale reduces flow, distorts residence time and creates blind spots in the leach circuit. Low initial Na₂CO₃ delays the onset; regular monitoring keeps the cleaning interval predictable.
2.3 Insoluble blockage
Insolubles do not dissolve. They accumulate in strainers, dosing nozzles and drip emitters, and on long heap campaigns they change the distribution of solution across the pad. Uneven wetting produces channeling, poor recovery in dry zones and misleading composite samples. Ultra-low insolubles are therefore a hydraulic control, not just a purity statistic.
2.4 Cyanide-consuming gangue
Copper minerals, pyrrhotite, arsenopyrite and partially oxidised sulphides form stable cyanocomplexes and thiocyanate. The reagent is not wasted by the gold reaction but by the mineralogy. When a plant changes ore source or blend, the consumption baseline must be re-established with bottle roll or column tests rather than carried over from the previous block.
3. Tutorial: build a NaCN dosing budget in seven steps
- دھات کی خصوصیات بنائیں۔ Record head grade, clay fraction, sulphide and copper content, and the particle size distribution reaching the leach feed. These four parameters set the expected side-reaction demand.
- Run a bottle roll test at the intended pH and pulp density, sampling dissolved gold and free cyanide at 2, 6, 12 and 24 hours. Plot the curve rather than reading only the endpoint.
- Fix the free-cyanide target for the circuit — a working band, not a single number — and define the titration method used to verify it, typically silver nitrate titration with an appropriate indicator.
- Convert to kg/t of ore. Translate the laboratory consumption into a plant dosing rate using pulp density and throughput, then add a defined allowance for gangue demand.
- Build the addition profile. Front-load the dose where the dissolution curve is steep, taper it as the curve flattens, and avoid a flat continuous feed that wastes reagent in the final hours.
- Verify against the batch COA. Compare the actual assay of the delivered lot with the assumption used in step 3, and correct the pump set-point if the NaCN assay differs.
- Close the record loop. Log consumption, residual cyanide, dissolved oxygen, pH and recovery against each lot. Batch COA, TDS and MSDS should sit next to that log so deviations can be traced to a specific delivery.
This budget is a living document. A brownfield expansion, a new ore block or a change in make-up water quality resets at least one of the seven inputs, so the budget should be reviewed whenever the circuit feed changes.
4. خرابیوں کا سراغ لگانے کی میز
| علامات | ممکنہ وجہ | پہلے چیک کریں۔ |
|---|---|---|
| Slow dissolution, flat recovery | Oxygen transfer or pH limiting, not cyanide mass | Dissolved oxygen, pH profile, grind size |
| Consumption rising at same grade | New gangue or copper-bearing blend | Ore mineralogy, thiocyanate in solution |
| Scale on pumps and screens | Carbonate build-up, hard make-up water | Water hardness, Na₂CO₃ trend, cleaning interval |
| Dosing line or emitter plugging | Insolubles or precipitated salts | Strainer residue, insoluble assay on COA |
| pH drifting downward | Acidic ore, insufficient alkalinity control | Lime addition, NaOH on COA, buffering capacity |
| High residual cyanide in tails | Over-dosing after dissolution plateau | اضافی پروفائل، ٹائٹریشن فریکوئنسی |
5. Permit-first scheduling: the commercial constraint
Sodium cyanide is classified as UN 1689, Class 6.1 dangerous goods. Before a production slot is reserved, the destination import permit and the End-User Certificate must be verified. Dangerous-goods booking, packaging, inland transfer and port acceptance all sit behind that gate. Teams that build the documentation chain into the project calendar avoid idle reagent, missed campaigns and demurrage; teams that treat it as post-order paperwork absorb the cost later.
United Chemical استعمال کی چیزیں AuCyan™ Sodium Cyanide NaCN (≥98.3%) factory-direct at 18 MT MOQ under FOB or CIF terms, with batch COA, TDS and MSDS issued per lot. Where a cyanide permit is the binding constraint, evaluate AuLeach™ گولڈ لیچنگ ایجنٹ (GDA) – غیر مؤثر as a common-chemical route. For the adsorption stage, pair the leach circuit with AuCarb™ گولڈ ریکوری کوکونٹ شیل ایکٹیویٹڈ کاربن (≥99% سختی).
6. Where the three products sit in one flowsheet
| اسٹیج | مصنوعات | فیصلہ متغیر |
|---|---|---|
| تحلیل کرنا / leaching n | AuCyan™ Sodium Cyanide NaCN (≥98.3%) | Purity, free-cyanide control, permit status |
| جذب / بازیابی۔ | AuCarb™ گولڈ ریکوری کوکونٹ شیل ایکٹیویٹڈ کاربن (≥99% سختی) | سختی، K/R قدریں، اٹریشن، میش کٹ |
| لیچ کا متبادل راستہ | AuLeach™ گولڈ لیچنگ ایجنٹ (GDA) – غیر مؤثر | Common-chemical classification, pH band, ore validation |
AngloGold Ashanti announced on 5 November 2026 a three-year brownfield programme of US$750 million to US$900 million across Geita (Tanzania), Siguiri (Guinea), Cuiabá (Brazil) and Obuasi (Ghana), targeting at least 400,000 additional ounces of annual output by 2030. Geita alone is guided toward roughly 600,000 oz/y against 492,000 oz in 2025. Brownfield expansions of this kind do not replace the leaching circuit — they raise throughput on an existing footprint, which makes reagent consistency and delivery scheduling more valuable, not less. ماخذ: کمپنی Q3 2026 اپ ڈیٹ اور توسیع کا اعلان، 5 نومبر 2026۔
7. اکثر پوچھے گئے سوالات
Q1. Why specify NaCN ≥98.3% instead of a commodity grade?
Because the assay directly sets the free cyanide delivered per tonne. A tighter assay reduces dosing correction, limits side reactions and keeps the consumption curve stable across lots.
Q2. Which impurity matters most for a hard-water CIL plant?
Na₂CO₃, because carbonate scaling affects pumps, pipelines, emitters and screens. NaOH controls alkalinity, and insolubles control blockage — all three appear on the batch COA.
Q3. What pH band should a cyanidation circuit hold?
Typically pH 10.5–11.5. Below that the protective alkaline environment degrades; far above it reagent is consumed without dissolving additional gold.
Q4. How is free cyanide measured in the plant?
By routine titration of the leach solution, commonly with silver nitrate and an appropriate indicator, sampled at defined points rather than inferred from the dosing pump set-point.
Q5. Why does consumption rise when the ore source changes?
Copper minerals, sulphides and clay form cyanocomplexes or adsorb reagent. The baseline must be re-established with bottle roll or column tests for each new blend.
Q6. What documents are required before an order ships?
A verified destination import permit and an End-User Certificate, plus the dangerous-goods documentation for UN 1689, Class 6.1. Batch COA, TDS and MSDS accompany each lot.
Q7. کون سے انکوٹرمز دستیاب ہیں؟
FOB یا CIF شرائط اس پروڈکٹ لائن پر لاگو ہوتی ہیں۔
Q8۔ کم از کم آرڈر کیا ہے؟
18 MT per 1×20' FCL, supplied factory-direct with a single documentation standard across the order.
Q9. Why is the briquette form preferred over powder?
It holds up through maritime transit and inland temperature swings and reduces handling exposure during make-up at the plant.
Q10. Can AuCyan™ be evaluated alongside a non-hazardous route?
Yes. Where the cyanide permit chain is the binding constraint, AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous is evaluated against the same ore with its own pH and dosage validation.
Q11. How should a first order be qualified technically?
Against the batch TDS and COA, with laboratory validation on the plant's own ore and a defined free-cyanide control band before the FCL campaign begins.
Q12. Which adsorption product completes the circuit?
AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness), selected by K/R value, attrition limit and mesh cut for the duty of the specific CIP or CIL stage.
8. تکنیکی پڑھنے اور اندرونی روابط
AuCyan™ Sodium Cyanide product page · سنہری مثلث کا جائزہ · تین پروڈکٹ کا تکنیکی جائزہ · Sodium cyanide technical reference · AuCarb™ activated carbon guide · AC50 specification · AC55 specification · AC60 specification · BC1100 specification · AuLeach™ GDA پروڈکٹ کا صفحہ · لیچنگ ری ایجنٹس کا حوالہ · کیمیائی سوالات · صنعت کی خبریں
Request a quotation, TDS and batch COA, or discuss a dosing budget for your ore: کریں واٹس ایپ +86 173 9270 5576 · info@unitedchemicalcn.com
- بے ترتیب مواد
- گرم مواد
- گرم جائزہ مواد
- لچکدار گاہک اور سپلائر تعلقات کا ماہر (: انڈونیشیا)
- ڈیجیٹل الیکٹرانک ڈیٹونیٹر (تاخیر کا وقت 0 ~ 16000ms)
- پوٹاشیم پرمینگیٹ - صنعتی گریڈ
- Thiourea 99% ہائی ایکٹیویٹی پروفیشنل پروڈیوسر
- صنعتی سوڈیم نائٹریٹ 98.5%
- میں صحیح فلوٹیشن ریجنٹ کا انتخاب کیسے کروں؟
- کیا کان کنی کیمیکلز کے استعمال کے لیے مخصوص ضابطے ہیں؟
- 1کان کنی کے لیے رعایتی سوڈیم سائینائیڈ (CAS: 143-33-9) - اعلیٰ معیار اور مسابقتی قیمت
- 2سوڈیم سائنائیڈ 98.3% CAS 143-33-9 NaCN گولڈ ڈریسنگ ایجنٹ کان کنی کیمیکل انڈسٹریز کے لیے ضروری
- 3سوڈیم سائینائیڈ کی برآمدات پر چین کے نئے ضوابط اور بین الاقوامی خریداروں کے لیے رہنمائی
- 4سوڈیم سائینائیڈ (CAS: 143-33-9) اختتامی صارف کا سرٹیفکیٹ (چینی اور انگریزی ورژن)
- 5بین الاقوامی سائینائیڈ (سوڈیم سائینائیڈ) مینجمنٹ کوڈ - گولڈ مائن قبولیت کے معیارات
- 6چین فیکٹری سلفرک ایسڈ 98%
- 7اینہائیڈروس آکسالک ایسڈ 99.6% صنعتی گریڈ
- 1سوڈیم سائنائیڈ 98.3% CAS 143-33-9 NaCN گولڈ ڈریسنگ ایجنٹ کان کنی کیمیکل انڈسٹریز کے لیے ضروری
- 2اعلیٰ طہارت · مستحکم کارکردگی · اعلیٰ بحالی - جدید سونے کے لیچنگ کے لیے سوڈیم سائینائیڈ
- 3United Chemicalکی ریسرچ ٹیم ڈیٹا سے چلنے والی بصیرت کے ذریعے اتھارٹی کا مظاہرہ کرتی ہے۔
- 4AuCyan™ ہائی پرفارمنس سوڈیم سائنائیڈ | عالمی سونے کی کان کنی کے لیے 98.3% پاکیزگی
- 5ڈیجیٹل الیکٹرانک ڈیٹونیٹر (تاخیر کا وقت 0 ~ 16000ms)
- 6اعلی طاقت، اعلی صحت سے متعلق شاک ٹیوب ڈیٹونیٹر
- 7انڈسٹری الیکٹرک ڈیٹونیٹر






آن لائن پیغام مشاورت
تبصرہ شامل کریں: