
A Plant-Level Method for Turning Reagent Efficiency Into Margin
A rising gold price hides a lot of operational drift. The reagent line is one of the few costs a plant can measure and move.
AngloGold Ashanti's Q3 2026 update gives a clear read on gold mining economics at current prices: average realised price US$4,239/oz against US$3,490/oz a year earlier, and all-in sustaining cost US$2,170/oz against US$1,720/oz. Prices rose faster than costs, but royalties, fuel and capital intensity all climbed. For a plant operator, the useful response is not a macro view — it is a method that converts reagent efficiency into a cost-per-ounce figure that can be compared with the AISC line.
Key Takeaways
- Realised price rose 21% year on year to US$4,239/oz from US$3,490/oz.
- AISC rose too: US$2,170/oz against US$1,720/oz, driven by price-linked royalties, fuel and capital intensity.
- Production fell to 696,000 oz from 768,000 oz, so cost per ounce absorbed fixed cost over fewer ounces.
- Free cash flow fell to US$722 million from US$920 million as capital expenditure climbed to US$563 million from US$388 million.
- Reagent efficiency is measurable. Side reactions, over-dosing and uglerod fines are three loss channels that can be quantified in kg/t and converted to cost per ounce.
- Do not let price mask drift. A high gold price makes a rising consumption trend easy to ignore until the cycle turns.
| Metrik | Q3 2026 | Q3 2025 |
|---|---|---|
| Realised gold price | US$4,239/oz | US$3,490/oz |
| AISC | US$2,170/oz | US$1,720/oz |
| EBITDA | 1,568 million AQSh dollari | 1,400 million AQSh dollari |
| ishlab chiqarish | 696,000 oz | 768,000 oz |
| Bepul pul oqimi | 722 million AQSh dollari | 920 million AQSh dollari |
| Kapital xarajatlar | 563 million AQSh dollari | 388 million AQSh dollari |
Price-linked royalties added to unit costs over the period. Source: company Q3 2026 update, 5 November 2026. All figures above are disclosed company numbers; no plant cost figures have been estimated by the publisher.
1. Why a rising price is a poor excuse for drifting consumption
When realised price rises 21% year on year, a plant can absorb a meaningful increase in unit cost and still report a healthy margin. That is precisely the condition in which operational discipline slips: over-dosing becomes invisible, carbon make-up is written off as routine, and a rising reagent spend per tonne is attributed to ore rather than measured.
The Q3 2026 numbers show why that is risky. AISC rose US$450/oz while production fell from 768,000 oz to 696,000 oz, so fixed cost was spread over fewer ounces. Free cash flow fell even as EBITDA rose, because capital expenditure climbed from US$388 million to US$563 million. Price-linked royalties, fuel and capital intensity are largely outside a plant metallurgist's control; reagent efficiency is not.
2. Three reagent loss channels worth quantifying
2.1 Side reactions and impurity demand
Excess NaOH and Na₂CO₃, copper and arsenic minerals and high insolubles all consume reagent without dissolving gold. A high-purity NaCN briquette with low insolubles narrows that loss, and the batch COA is the reference for measuring it.
2.2 Over-dosing after the dissolution plateau
A flat continuous feed wastes reagent in the final hours of a leach, when the dissolution curve has flattened. A front-loaded, tapered dosing profile built from a bottle roll curve removes that spend without changing recovery.
2.3 Carbon fines carrying loaded gold
Fines generated above the ≤1.5% attrition design limit leave the circuit already loaded. The loss shows up as a gap between dissolved and recovered gold, not as a reagent invoice — which is why it is usually underestimated.
3. Tutorial: six steps from reagent efficiency to margin per ounce
- Establish a cost-per-tonne baseline. From plant logs, compute reagent spend per tonne of ore treated for a defined period, broken down by leaching reagent and carbon make-up.
- Decompose the three loss channels. Estimate the kg/t attributable to side reactions, to over-dosing after plateau, and to carbon fines carrying gold. Use measured titration and carbon inventory data, not assumptions.
- Compute the recoverable saving per tonne. Apply your own delivered reagent cost to the avoidable kg/t. Keep this separate from the gold value of recovered fines.
- Convert to cost per ounce. Divide the saving per tonne by recovered grade times metallurgical recovery to express it in currency per ounce, on the same basis as AISC.
- Compare with the AISC movement. Set the result against the US$450/oz year-on-year AISC increase. This tells you what share of cost pressure is addressable inside the circuit.
- Lock the gains with documentation. Batch COA, TDS and MSDS per lot, a fixed dosing profile, a defined free-siyanid or residual-reagent titration routine, and a carbon attrition target at ≤1.5%.
The method uses your own measured inputs. Published market figures set the context; they are not substitutes for plant data.
4. Muammolarni bartaraf etish jadvali
| Alomatlar | Mumkin sabab | Birinchi tekshirish |
|---|---|---|
| Reagent spend per tonne rising | Side reactions or flat dosing profile | COA impurity figures, titration log, dissolution curve |
| High residual reagent in tails | Dosing continues after plateau | Qo'shish profili, titrlash chastotasi |
| Dissolved versus recovered gold gap | Loaded carbon fines leaving circuit | Attrition against ≤1.5%, tails assay, screen aperture |
| Cost per ounce worse with fewer ounces | Fixed cost over lower production | Throughput, grade, recovery |
| Deviation cannot be attributed | Lot not linked to plant log | COA filing, sampling routine |
5. Where the three products act on the cost line
| Loss channel | mahsulot | nazorat |
|---|---|---|
| Impurity-driven side reactions | AuCyan™ Natriy siyanid NaCN (≥98.3%) | Low NaOH / Na₂CO₃ / insolubles; batch COA |
| Loaded-gold loss to fines | AuCarb™ oltin rangli kokos qobig'i bilan faollashtirilgan uglerod (≥99% qattiqlik) | Attrition ≤1.5%, 6×12 mesh, platelet ≤5.0% |
| Permit-driven schedule cost | AuLeach™ oltinni eritib olish agenti (GDA) – Xavfsiz | General-cargo route, pH 10.5–12 validation |
United Chemical supplies all three factory-direct under FOB or CIF terms with batch COA, TDS and MSDS, serving mining operations in more than 77 countries at 15 / 18 / 28 MT minimum order quantities per 1×20' FCL.
6. Tez-tez beriladigan savollar
Q1. What was the Q3 2026 realised gold price?
US$4,239/oz, up from US$3,490/oz a year earlier — a 21% increase.
Q2. What was the Q3 2026 AISC?
US$2,170/oz against US$1,720/oz in Q3 2025.
Q3. Did production rise with the price?
No. Production was 696,000 oz against 768,000 oz a year earlier, so fixed cost was spread over fewer ounces.
Q4. Why did free cash flow fall while EBITDA rose?
Capital expenditure climbed to US$563 million from US$388 million, taking free cash flow to US$722 million from US$920 million.
Q5. Which cost drivers are outside plant control?
Price-linked royalties, fuel and capital intensity. Reagent efficiency is one of the few variables a plant team can measure and move.
Q6. What are the three reagent loss channels?
Impurity-driven side reactions, over-dosing after the dissolution plateau, and carbon fines carrying loaded gold.
Q7. How do you express a reagent saving on the same basis as AISC?
Compute the avoiding cost per tonne of ore, then divide by recovered grade times metallurgical recovery to get a currency-per-ounce figure.
Q8. Which product controls impurity-driven side reactions?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), with controlled NaOH, Na₂CO₃ and ultra-low insolubles verified against the batch COA.
Q9. Which carbon parameter limits gold loss to fines?
Attrition ≤1.5% on AC50, together with ≥99% hardness, a 6×12 mesh cut and platelet ≤5.0%.
10-savol. Qaysi Inkoterms qoidalari qo'llaniladi?
FOB yoki CIF shartlari qo'llaniladi.
Q11. Can published market figures replace plant data in the calculation?
No. Grade, recovery, kg/t consumption and delivered reagent cost must come from plant logs; market figures only set the context.
12-savol. Texnik xususiyatlarni qayerda ko'rib chiqish mumkin?
Quyida havola qilingan AuCyan™, AuCarb™ va AuLeach™ texnik sahifalarida, har bir partiya uchun partiyaviy COA, TDS va MSDS ko'rsatilgan.
7. Manbalar va ichki havolalar
AuCyan™ · AuCarb™ qo'llanmasi · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Oltin uchburchak · Uch mahsulotga umumiy nuqtai nazar · Kimyoviy moddalar bo'yicha tez-tez so'raladigan savollar · Sanoat yangiliklari · Biz bilan bog'laning
Source note: company figures are drawn from the Q3 2026 update dated 5 November 2026. Reagent specifications are United Chemical product data. The calculation is a method using plant-supplied inputs.
Biz bilan bog'lanish · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Tasodifiy tarkib
- Issiq tarkib
- Qiziqarli sharh mazmuni
- Moslashuvchan mijozlar va yetkazib beruvchilar bilan aloqalar bo'yicha mutaxassis (Manzil: Hindiston)
- Magneto elektr detonator (Adashgan oqimga qarshi)
- Akrilamid
- Suvni tozalash uchun natriy glyukonat
- United Chemical, TuXingSun Mining va Xenan Lingbao oltin konlari birgalikda siyanidsiz konni barpo etishdi.
- Navigatsiya o'zgarishi: kimyo sanoatining kelajakdagi yo'nalishi
- Qaysi kimyoviy eng korroziv hisoblanadi?
- 1Konchilik uchun chegirmali natriy siyanid (CAS: 143-33-9) - Yuqori sifat va raqobatbardosh narxlar
- 2Natriy siyanid 98.3% CAS 143-33-9 NaCN oltin boyituvchi agenti Konchilik kimyo sanoati uchun zarur
- 3Xitoyning natriy siyanidi eksporti bo'yicha yangi qoidalari va xalqaro xaridorlar uchun ko'rsatmalar
- 4Natriy siyanidi (CAS: 143-33-9) Yakuniy foydalanuvchi sertifikati (xitoy va inglizcha versiyalari)
- 5Xalqaro siyanid (natriy siyanidi) boshqaruv kodeksi - Oltin konini qabul qilish standartlari
- 6Xitoy zavodi sulfat kislota 98%
- 7Suvsiz oksalat kislotasi 99.6% sanoat darajasi
- 1Natriy siyanid 98.3% CAS 143-33-9 NaCN oltin boyituvchi agenti Konchilik kimyo sanoati uchun zarur
- 2Yuqori soflik · Barqaror ishlash · Yuqori tiklanish - zamonaviy oltin yuvish uchun natriy siyanid
- 3United ChemicalTadqiqot guruhi ma'lumotlarga asoslangan tushunchalar orqali o'z vakolatlarini namoyish etadi
- 4AuCyan™ Yuqori Samarali Natriy Sianid | Global Oltin Qazib Olish Uchun 98.3% Soflik
- 5Raqamli elektron detonator (kechikish vaqti 0 ~ 16000ms)
- 6Yuqori quvvatli, yuqori aniqlikdagi zarba trubkasi detonatori
- 7sanoat elektr detonatori






Onlayn xabar maslahati
Fikr qo'shing: