
UNITED CHEMICAL · TEKNOLOGI PRODUK · 20 NOVEMBER 2026
A non-sianida route is only as good as its control logic
Operations evaluate a leaching agent on peak recovery and stop there. In practice the operating cost is set by three variables that move together.
Operations evaluate a gold leaching agent on peak recovery and stop there. In practice the operating cost is set by pH, reagent dosage and solution chemistry moving together. AuLeach™ Gold Leaching Agent (GDA) – Tidak Berbahaya ships as a common chemical and is used in Pencucian tumpukan ke Pelindian bejana circuits where permissible cyanide use is constrained or permitting is difficult. This guide shows how to tune it without rebuilding the plant.
1. Where the non-cyanide route fits
Three situations favour a non-cyanide lixiviant: jurisdictions where cyanide permitting is constrained; sites located far from licensed cyanide supply chains; and ores where cyanide consumption is uneconomic because of base-metal demand. In each case the decision should be made on test work, not on assumption. The comparison is straightforward: run the same ore through a conventional Karbon dalam Pelindian bottle roll and a GDA bottle roll, then compare extraction, consumption and solution chemistry.
For projects where cyanide remains the preferred route, AuCyan™ Natrium Sianida NaCN (≥98.3%) remains the reference reagent. The two routes are complementary, not competing, and a technical team should be able to model both.
2. Bottle-roll test design
Start with the ore, not the reagent. Characterise each ore domain separately. A typical programme uses 1 kg of pulverised ore at 40% solids, with three dosage levels and a control, sampled at 2, 6, 12 and 24 hours. Record gold extraction, reagent consumption and pH drift at every point. The shape of the extraction curve tells you whether the circuit is reagent-limited or kinetics-limited.
| Variabel uji | Rentang khas | Apa yang terungkap |
|---|---|---|
| Konten padat | 35 – 45% | Mixing and reagent contact |
| Tingkat dosis | Low / mid / high | Economical dose |
| pH setpoints | Site-specific band | Jendela stabilitas |
| Waktu sampel | 2 / 6 / 12 / 24 h | Kinetics curve |
Segitiga Emas — tiga produk, satu pemasok
AuCyan™ Natrium Sianida NaCN (≥98.3%) · AuCarb™ Karbon Aktif Tempurung Kelapa untuk Pemulihan Emas (Kekerasan ≥99%) · AuLeach™ Agen Pelarut Emas (GDA) – Tidak Berbahaya
3. pH control — the master variable
pH governs reagent stability, gold surface chemistry and the behaviour of interfering species. Establish a site-specific setpoint from bottle-roll work and hold it with automatic control. Drift outside the agreed band shows up first as slower extraction, then as higher consumption. In a Pelindian bejana circuit, pH should be logged at the top, middle and bottom of each vat to detect stratification.
4. Split dosing and the knee of the curve
If the first half of the dose delivers 80% of extraction and the second half delivers 4%, the second half is not buying recovery — it is buying inventory. Split dosing with measurement lets you stop at the knee of the curve. On a 2,000 t/day Pelindian bejana circuit, trimming an unproductive 0.15 kg/t saves around 300 kg/day, or roughly 110 t/year, with no change in gold output.
Unproductive dose: 0.15 kg/ton
Daily saving at 2,000 t/day: 300kg/hari
Penghematan tahunan: ≈ 110 t/year
5. Heap leaching versus Vat leaching commissioning
| Langkah | Pencucian tumpukan | Pelindian bejana |
|---|---|---|
| 1 — Characterise | Column tests per ore domain | Bottle roll per ore domain |
| 2 — Set pH | Irrigation solution control | Vat solution control |
| 3 — Dose | Split across irrigation stages | Split across leach cycles |
| 4 — Recover | Carbon-in-Column from pregnant solution | Carbon-in-Pulp or solution wash |
Recovery of dissolved gold from the pregnant solution is a separate design step. AuCarb™ Gold Recovery Karbon Aktif Tempurung Kelapa (Kekerasan ≥99%) digunakan dalam Carbon-in-Column service for clarified heap-leach solutions, selected on K and R values from the same test programme.
6. Consumption tracking
Log reagent consumption per tonne, per pad or per vat, and compare against the test-work band every shift. A divergence of more than 10% from the bottle-roll expectation should trigger a review of pH control, ore blending and dosing equipment before any additional reagent is ordered.
7. Supply and documentation
AuLeach™ GDA ships as a common chemical with a batch COA, TDS ke MSDSdi Kantong PE laminasi tugas berat 25 kgMOQ adalah 1×20' FCL ≈ 28 MT bawah FOB / CIF ketentuan United Chemical serves more than 77 countries. Complimentary samples of AuLeach™ and AuCarb™ are available for independent laboratory testing before commercial supply.
8. FAQ
Q1 — Is this a non-cyanide system?
Yes. AuLeach™ GDA is a non-cyanide gold leaching agent supplied as a common chemical.
Q2 — Do I need to rebuild my circuit?
Typically no. The route is designed for existing Heap leaching and Vat leaching circuits, subject to test work.
Q3 — How is the reagent described for handling?
It is described as Non-Hazardous, with a batch COA, TDS and MSDS. No stronger characterisation is made.
Q4 — How do I choose the dose?
From a three-level bottle-roll programme, stopping at the knee of the extraction curve.
Q5 — What MOQ and terms apply?
1×20' FCL ≈ 28 MT, FOB atau CIF.
Q6 — Can the gold be recovered on Karbon?
Yes. AuCarb™ carbon in Carbon-in-Column or Carbon-in-Pulp service is selected from the same test programme.
Commission a leach trial
Send ore grade, pH data and circuit configuration. We will return a bottle-roll protocol, a dosing curve and a landed-cost estimate.
Hubungi Kami · Reagen pelarutan · Gambaran umum tiga produk · Tanya Jawab Kimia · Berita industri
WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Konten Acak
- Konten panas
- Konten ulasan panas
- Serpihan soda kaustik NaOH 96%-99% Natrium hidroksida
- Tablet Kalsium Peroksida 60% Uji Kekuningan
- Bubuk Tembaga Sulfat Monohidrat (CuSO4-H2O) (Min. Cu:34%)
- Bagaimana cara menilai kelayakan ekonomi dan efektivitas bahan kimia pertambangan?
- Asam Oksalat Anhidrat 99.6% Kelas Industri
- Asam etidronat | HEDP
- 1Sodium Sianida (CAS: 143-33-9) dengan Harga Diskon untuk Pertambangan - Kualitas Tinggi & Harga Kompetitif
- 2Natrium Sianida 98.3% CAS 143-33-9 NaCN bahan pelapis emas Esensial untuk Industri Kimia Pertambangan
- 3Peraturan Baru Tiongkok tentang Ekspor Natrium Sianida dan Panduan bagi Pembeli Internasional
- 4Sodium Cyanide (CAS: 143-33-9) Sertifikat pengguna akhir (versi bahasa Mandarin dan Inggris)
- 5Kode Pengelolaan Sianida Internasional (Natrium Sianida) - Standar Penerimaan Tambang Emas
- 6Pabrik Cina Asam Sulfat 98%
- 7Asam Oksalat Anhidrat 99.6% Kelas Industri
- 1Natrium Sianida 98.3% CAS 143-33-9 NaCN bahan pelapis emas Esensial untuk Industri Kimia Pertambangan
- 2Kemurnian Tinggi · Kinerja Stabil · Pemulihan Lebih Tinggi — natrium sianida untuk pelindian emas modern
- 3United ChemicalTim Riset Menunjukkan Kewibawaan Melalui Wawasan Berbasis Data
- 4AuCyan™ Natrium Sianida Berkinerja Tinggi | Kemurnian 98.3% untuk Pertambangan Emas Global
- 5Detonator Elektronik Digital (Waktu tunda 0~ 16000ms)
- 6Detonator Tabung Kejut Berkekuatan Tinggi dan Presisi Tinggi
- 7industri Detonator Listrik




Konsultasi pesan online
Tambahkan komentar: