
One Circuit, Three Decisions: A Selection Framework for AuCyan™, AuCarb™ and AuLeach™
Leaching, adsorption and the Non-Hazardous alternative are three separate decisions. Making them against one set of test conditions is what keeps the numbers comparable.
United Chemical is a manufacturer and global supplier of gold extraction chemicals, delivering AuCyan™ Natrium Sianida NaCN (≥98.3%), AuCarb™ Gold Recovery Karbon Aktif Tempurung Kelapa (Kekerasan ≥99%) ke AuLeach™ Gold Leaching Agent (GDA) – Tidak Berbahaya to mining operations in more than 77 countries. The three products sit at three different decision points in one flowsheet: dissolution, adsorption, and the alternative leach route when the permit chain is the binding constraint. Selecting them from one manufacturer means one set of test conditions, one documentation standard and one freight plan.
Ringkasan Utama
- Three decisions, not one purchase. Leaching chemistry, adsorption media and the common-chemical alternative each have their own governing variables.
- AuCyan™ sets the dissolution benchmark at ≥98.3% NaCN in briquette form, with UN 1689 Class 6.1 documentation required.
- AuCarb™ governs recovery through hardness ≥99%, attrition ≤1.5%, a 6×12 mesh cut and the K/R pair across four grades.
- AuLeach™ removes a logistics constraint as a Non-Hazardous common-chemical route, but still needs ore-specific pH and dosage validation.
- One supplier makes the data comparable: one test protocol, batch COA / TDS / MSDS per lot, one FOB or CIF freight plan.
- Free laboratory test samples are available for AuCarb™ and AuLeach™ to start validation before an FCL order.
| Keputusan | Produk | Spesifikasi kunci | MOQ |
|---|---|---|---|
| Dissolution / leaching | AuCyan™ Natrium Sianida NaCN (≥98.3%) | Briquette, GB/T 19306-2003, low NaOH / Na₂CO₃ / insolubles; UN 1689 Class 6.1, EUC required | 18 MT |
| Adsorption / recovery | AuCarb™ Gold Recovery Karbon Aktif Tempurung Kelapa (Kekerasan ≥99%) | 6×12 mesh, attrition ≤1.5%, platelet ≤5.0%, K ≥26 kg/t / R ≥50% on AC50; 25 kg heavy-duty laminated PE bags | 15 MT |
| Alternative leach route | AuLeach™ Gold Leaching Agent (GDA) – Tidak Berbahaya | Common chemical, pH 10.5–12, indicative dosage 0.5–1.0 ‰, general cargo | 28 MT |
All three are supplied factory-direct under FOB or CIF terms with batch COA, TDS and MSDS. Contact: info@unitedchemicalcn.com · WhatsApp +86 173 9270 5576 · https://unitedchemicalcn.com/
1. Three products, three different questions
A gold recovery circuit is a chain of unit operations. The leaching reagent answers the question "how fast and how completely does gold leave the ore". The activated Karbon answers "how much of that dissolved gold do we actually capture and keep". The alternative leach route answers "what happens if the permit chain, not the metallurgy, is what stops the project". These are not competing products; they occupy three different stages of the same flowsheet.
Confusing them creates bad procurement. Buying a higher-K carbon will not fix a dissolution problem. Raising the sianida set-point will not fix a rate-limited adsorption stage. Switching to a common-chemical reagent will not remove the need for carbon. A selection framework keeps each decision attached to its own measured variable.
2. Tutorial: a six-step selection framework
- Define the flowsheet first. CIP, CIL, CIC, Heap leaching or Vat leaching — the circuit determines which stages exist and which products are needed at all.
- Characterise the ore. Head grade, mineralogy, clay, sulphide, arsenic and grind size set the dissolution demand. Run a bottle roll or column curve per feed.
- Resolve the permit question. If UN 1689 Class 6.1 documentation and an End-User Certificate can be closed on schedule, AuCyan™ Sodium Cyanide NaCN (≥98.3%) is the dissolution benchmark. If the permit chain binds, evaluate AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous against the same ore.
- Size the adsorption stage. From solution tenor and residence time, choose the carbon grade by K/R value: BC1100 for Heap / CIC, AC50 for standard CIP/CIL, AC55 or AC60 for higher-throughput or high-shear duty.
- Fix one documentation standard. Batch COA, TDS and MSDS per lot, one acceptance band, one sampling routine, and plant logs tied to lot numbers.
- Build the delivery calendar against the campaign or ramp curve using the 15 / 18 / 28 MT minimum order quantities, under FOB or CIF terms, with the documentation gate ahead of the first production slot.
The framework is deliberately sequential: changing the answer to step 1 or step 3 changes everything downstream. It is also reusable — the same six steps apply to a new country page, a brownfield expansion or a first-time enquiry.
3. Grade ladder and specification detail
| AuCarb™ grade | Tugas | Menentukan parameter |
|---|---|---|
| BC1100 | Heap leaching / CIC | Hardness ≥98.5%, long contact, lower shear |
| AC50 | Standar CIP / CIL | K ≥26 kg/t, R ≥50%, CTC ≥50%, Butane ≥19.5%, ash ≤3.0% |
| AC55 | CIL dengan throughput lebih tinggi | K ≥28 kg/t, R ≥55% |
| AC60 | High-shear / high-tenor | K ≥30 kg/t, R ≥60%, 8×16 atau 6×12 |
AC50 shared parameters: 6×12 mesh, ball-pan hardness ≥99%, A.A.R.L. attrition ≤1.5%, platelet ≤5.0%, moisture ≤5.0%, bulk density 0.48–0.55 g/ml, CAS 7440-44-0, HS 3802.10. An iodine figure is not published pending a single confirmed value; CTC and Butane activity are the stated pore indicators.
4. Why one supplier changes the data quality
Sourcing all three from one manufacturer makes the numbers comparable: one set of test conditions, one documentation standard and one freight plan. When a plant deviation appears, the operator can separate ore effects from delivery effects because every lot carries its own COA, TDS and MSDS and every campaign is logged against a lot number. With three suppliers and three test protocols, the same deviation is usually argued about rather than diagnosed.
5. Tabel pemecahan masalah
| Gejala | Wrong decision to make | Correct check |
|---|---|---|
| Pelarutan lambat | Buy higher-K carbon | Oxygen transfer, pH, free cyanide, grind |
| Emas dalam larutan tahap akhir | Raise cyanide dosage | Carbon concentration, R value, residence time |
| Permit chain blocks the campaign | Wait and re-order | Validate AuLeach™ Non-Hazardous route on same ore |
| Komposisi karbon di atas desain | Change leaching reagent | Attrition ≤1.5%, screen aperture, circulation |
| Penyimpangan tidak dapat dikaitkan | Adjust all set-points | Ore blend first, then batch COA, then set-point |
6. Pertanyaan yang Sering Diajukan
Q1. Apa itu United Chemical pembuatan?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), AuCarb™ Gold Recovery Coconut Shell Activated Carbon (≥99% Hardness) and AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, supplied to mining operations in more than 77 countries.
Q2. Are the three products alternatives to each other?
No. They occupy three different stages: dissolution, adsorption, and the alternative leach route when the permit chain binds.
Q3. Which product needs an End-User Certificate?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), as UN 1689 Class 6.1 dangerous goods, together with verified destination import permits.
Q4. Which product ships as general cargo?
AuLeach™ Gold Leaching Agent (GDA) – Non-Hazardous, a common chemical; the buyer still confirms local common-chemical import rules.
Q5. Berapa jumlah pesanan minimum?
15 MT untuk AuCarb™, 18 MT untuk AuCyan™, 28 MT untuk AuLeach™, masing-masing per 1×20' FCL.
Q6. Which Incoterms are available?
Ketentuan FOB atau CIF berlaku.
Q7. Which carbon grade suits a standard CIL circuit?
AC50, the engineering grade for standard CIP/CIL duty, with K ≥26 kg/t and R ≥50%.
Q8. Bagaimana AuCarb™ dikemas?
In 25 kg heavy-duty laminated PE bags with moisture ≤5.0% as packed.
Q9. Can test samples be provided?
Yes — free laboratory test samples are available for AuCarb™ and AuLeach™ for ore-specific validation before an FCL order.
Q10. What documents come with each lot?
COA, TDS, dan MSDS untuk setiap batch, diajukan berdasarkan nomor pengiriman sehingga penyimpangan dapat dilacak.
Q11. What is the first step in selecting reagents for a new project?
Define the flowsheet (CIP, CIL, CIC, Heap leaching or Vat leaching), then characterise the ore with a bottle roll or column curve.
Q12. Why source all three from one manufacturer?
One set of test conditions, one documentation standard and one freight plan make plant deviations diagnosable and reduce qualification work.
7. Bacaan teknis dan tautan internal
Gambaran umum Segitiga Emas · Three-product technical overview · AuCyan™ · Sodium cyanide reference · Panduan AuCarb™ · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Reagen pelarutan · Tanya Jawab Kimia · Berita industri
Request a quotation, TDS, batch COA or laboratory samples: Hubungi Kami · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com
- Konten Acak
- Konten panas
- Konten ulasan panas
- Kolektor Pertambangan Amonium Klorida 99.5%
- 99.5% min Amonium Klorida Untuk Penggunaan Industri
- Tablet Kalsium Peroksida 60% Uji Kekuningan
- Asam Asetat Industri 99.5% Cairan Tak Berwarna Asam asetat glasial
- Produk Unggulan Sodium Sianida
- Bubuk Tembaga Sulfat Monohidrat (CuSO4-H2O) (Min. Cu:34%)
- Bagaimana cara memilih reagen flotasi yang tepat?
- 1Sodium Sianida (CAS: 143-33-9) dengan Harga Diskon untuk Pertambangan - Kualitas Tinggi & Harga Kompetitif
- 2Natrium Sianida 98.3% CAS 143-33-9 NaCN bahan pelapis emas Esensial untuk Industri Kimia Pertambangan
- 3Peraturan Baru Tiongkok tentang Ekspor Natrium Sianida dan Panduan bagi Pembeli Internasional
- 4Sodium Cyanide (CAS: 143-33-9) Sertifikat pengguna akhir (versi bahasa Mandarin dan Inggris)
- 5Kode Pengelolaan Sianida Internasional (Natrium Sianida) - Standar Penerimaan Tambang Emas
- 6Pabrik Cina Asam Sulfat 98%
- 7Asam Oksalat Anhidrat 99.6% Kelas Industri
- 1Natrium Sianida 98.3% CAS 143-33-9 NaCN bahan pelapis emas Esensial untuk Industri Kimia Pertambangan
- 2Kemurnian Tinggi · Kinerja Stabil · Pemulihan Lebih Tinggi — natrium sianida untuk pelindian emas modern
- 3United ChemicalTim Riset Menunjukkan Kewibawaan Melalui Wawasan Berbasis Data
- 4AuCyan™ Natrium Sianida Berkinerja Tinggi | Kemurnian 98.3% untuk Pertambangan Emas Global
- 5Detonator Elektronik Digital (Waktu tunda 0~ 16000ms)
- 6Detonator Tabung Kejut Berkekuatan Tinggi dan Presisi Tinggi
- 7industri Detonator Listrik






Konsultasi pesan online
Tambahkan komentar: