金価格4,239米ドル/オンスに対し、AISCは2,170米ドル/オンス:試薬効率を利益に変える工場レベルの手法

Q3 2026 figures show prices rising faster than costs — but royalties, fuel and capital intensity are climbing too. Here is how to quantify the reagent contribution.

Gold recovery chemical product range presented for plant cost and margin analysis

Market Analysis · Q3 2026

A Plant-Level Method for Turning Reagent Efficiency Into Margin

A rising gold price hides a lot of operational drift. The reagent line is one of the few costs a plant can measure and move.

素早い回答

AngloGold Ashanti's Q3 2026 update gives a clear read on gold mining economics at current prices: average realised price US$4,239/oz against US$3,490/oz a year earlier, and all-in sustaining cost US$2,170/oz against US$1,720/oz. Prices rose faster than costs, but royalties, fuel and capital intensity all climbed. For a plant operator, the useful response is not a macro view — it is a method that converts reagent efficiency into a cost-per-ounce figure that can be compared with the AISC line.

主要なポイント(要点)

  • Realised price rose 21% year on year to US$4,239/oz from US$3,490/oz.
  • AISC rose too: US$2,170/oz against US$1,720/oz, driven by price-linked royalties, fuel and capital intensity.
  • Production fell to 696,000 oz from 768,000 oz, so cost per ounce absorbed fixed cost over fewer ounces.
  • Free cash flow fell to US$722 million from US$920 million as capital expenditure climbed to US$563 million from US$388 million.
  • Reagent efficiency is measurable. Side reactions, over-dosing and Carbon fines are three loss channels that can be quantified in kg/t and converted to cost per ounce.
  • Do not let price mask drift. A high gold price makes a rising consumption trend easy to ignore until the cycle turns.
Dated fact table · Q3 2026 update
メトリック3 Q20263 Q2025
Realised gold price1オンスあたり4,239米ドル1オンスあたり3,490米ドル
AISC1オンスあたり2,170米ドル1オンスあたり1,720米ドル
EBITDAUS $ 1,568mUS $ 1,400m
生産696,000オンス768,000オンス
フリーキャッシュフローUS $ 722mUS $ 920m
設備投資US $ 563mUS $ 388m

Price-linked royalties added to unit costs over the period. Source: company Q3 2026 update, 5 November 2026. All figures above are disclosed company numbers; no plant cost figures have been estimated by the publisher.

1. Why a rising price is a poor excuse for drifting consumption

When realised price rises 21% year on year, a plant can absorb a meaningful increase in unit cost and still report a healthy margin. That is precisely the condition in which operational discipline slips: over-dosing becomes invisible, carbon make-up is written off as routine, and a rising reagent spend per tonne is attributed to ore rather than measured.

The Q3 2026 numbers show why that is risky. AISC rose US$450/oz while production fell from 768,000 oz to 696,000 oz, so fixed cost was spread over fewer ounces. Free cash flow fell even as EBITDA rose, because capital expenditure climbed from US$388 million to US$563 million. Price-linked royalties, fuel and capital intensity are largely outside a plant metallurgist's control; reagent efficiency is not.

2. Three reagent loss channels worth quantifying

2.1 Side reactions and impurity demand

Excess NaOH and Na₂CO₃, copper and arsenic minerals and high insolubles all consume reagent without dissolving gold. A high-purity NaCN briquette with low insolubles narrows that loss, and the batch COA is the reference for measuring it.

2.2 Over-dosing after the dissolution plateau

A flat continuous feed wastes reagent in the final hours of a leach, when the dissolution curve has flattened. A front-loaded, tapered dosing profile built from a bottle roll curve removes that spend without changing recovery.

2.3 Carbon fines carrying loaded gold

Fines generated above the ≤1.5% attrition design limit leave the circuit already loaded. The loss shows up as a gap between dissolved and recovered gold, not as a reagent invoice — which is why it is usually underestimated.

3. Tutorial: six steps from reagent efficiency to margin per ounce

  1. Establish a cost-per-tonne baseline. From plant logs, compute reagent spend per tonne of ore treated for a defined period, broken down by leaching reagent and carbon make-up.
  2. Decompose the three loss channels. Estimate the kg/t attributable to side reactions, to over-dosing after plateau, and to carbon fines carrying gold. Use measured titration and carbon inventory data, not assumptions.
  3. Compute the recoverable saving per tonne. Apply your own delivered reagent cost to the avoidable kg/t. Keep this separate from the gold value of recovered fines.
  4. Convert to cost per ounce. Divide the saving per tonne by recovered grade times metallurgical recovery to express it in currency per ounce, on the same basis as AISC.
  5. Compare with the AISC movement. Set the result against the US$450/oz year-on-year AISC increase. This tells you what share of cost pressure is addressable inside the circuit.
  6. Lock the gains with documentation. Batch COA, TDS and MSDS per lot, a fixed dosing profile, a defined free-シアン化物 or residual-reagent titration routine, and a carbon attrition target at ≤1.5%.

The method uses your own measured inputs. Published market figures set the context; they are not substitutes for plant data.

4. トラブルシューティング表

症状考えられる原因最初のチェック
Reagent spend per tonne risingSide reactions or flat dosing profileCOA impurity figures, titration log, dissolution curve
High residual reagent in tailsDosing continues after plateau添加プロファイル、滴定頻度
Dissolved versus recovered gold gapLoaded carbon fines leaving circuitAttrition against ≤1.5%, tails assay, screen aperture
Cost per ounce worse with fewer ouncesFixed cost over lower productionThroughput, grade, recovery
Deviation cannot be attributedLot not linked to plant logCOA filing, sampling routine

5. Where the three products act on the cost line

Loss channel製品管理
Impurity-driven side reactionsAuCyan™ シアン化ナトリウム NaCN (≥98.3%)Low NaOH / Na₂CO₃ / insolubles; batch COA
Loaded-gold loss to finesAuCarb™ 金回収用ココナッツ殻活性炭(硬度99%以上)Attrition ≤1.5%, 6×12 mesh, platelet ≤5.0%
Permit-driven schedule costAuLeach™ 金浸出剤(GDA) – 非危険物General-cargo route, pH 10.5–12 validation

United Chemical supplies all three factory-direct under FOB or CIF terms with batch COA, TDS and MSDS, serving mining operations in more than 77 countries at 15 / 18 / 28 MT minimum order quantities per 1×20' FCL.

6 よくある質問

Q1. What was the Q3 2026 realised gold price?
US$4,239/oz, up from US$3,490/oz a year earlier — a 21% increase.

Q2. What was the Q3 2026 AISC?
US$2,170/oz against US$1,720/oz in Q3 2025.

Q3. Did production rise with the price?
No. Production was 696,000 oz against 768,000 oz a year earlier, so fixed cost was spread over fewer ounces.

Q4. Why did free cash flow fall while EBITDA rose?
Capital expenditure climbed to US$563 million from US$388 million, taking free cash flow to US$722 million from US$920 million.

Q5. Which cost drivers are outside plant control?
Price-linked royalties, fuel and capital intensity. Reagent efficiency is one of the few variables a plant team can measure and move.

Q6. What are the three reagent loss channels?
Impurity-driven side reactions, over-dosing after the dissolution plateau, and carbon fines carrying loaded gold.

Q7. How do you express a reagent saving on the same basis as AISC?
Compute the avoiding cost per tonne of ore, then divide by recovered grade times metallurgical recovery to get a currency-per-ounce figure.

Q8. Which product controls impurity-driven side reactions?
AuCyan™ Sodium Cyanide NaCN (≥98.3%), with controlled NaOH, Na₂CO₃ and ultra-low insolubles verified against the batch COA.

Q9. Which carbon parameter limits gold loss to fines?
Attrition ≤1.5% on AC50, together with ≥99% hardness, a 6×12 mesh cut and platelet ≤5.0%.

Q10. どのインコタームズが適用されますか?
FOBまたはCIF条件が適用されます。

Q11. Can published market figures replace plant data in the calculation?
No. Grade, recovery, kg/t consumption and delivered reagent cost must come from plant logs; market figures only set the context.

Q12. 仕様書はどこで確認できますか?
下記リンク先のAuCyan™、AuCarb™、AuLeach™の技術ページには、ロットごとのCOA、TDS、MSDSが掲載されています。

7. 出典と内部リンク

AuCyan™ · AuCarb™ ガイド· AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA ·ゴールデントライアングル· 3製品概要·化学に関するよくある質問·業界ニュース·お問い合わせ

Source note: company figures are drawn from the Q3 2026 update dated 5 November 2026. Reagent specifications are United Chemical product data. The calculation is a method using plant-supplied inputs.

Quantify the reagent contribution in your own plant

お問い合わせ ・WhatsApp +86 173 9270 5576 ・ info@unitedchemicalcn.com

  • Random Content
  • 注目のコンテンツ
  • 注目のレビューコンテンツ

おすすめのアイテム

オンラインメッセージ相談

コメントを追加:

+8617392705576WhatsApp QRコードQRコードをスキャンする
ご相談はメッセージをお寄せください
メッセージをありがとうございます。すぐにご連絡させていただきます。
送信
オンラインカスタマーサービス