L-Espansjoni ta' Cuiabá ta' US$200–250 Miljun: Il-Varjabbiltà tal-Mineral tal-Blat Iebes u l-Każ għal Speċifikazzjonijiet Konsistenti tar-Reaġenti

A 75,000 oz increment on an existing 194,000 oz base — plus a six-step method for holding one reagent specification across variable hard-rock feed.

Gold recovery reagent product range displayed for hard rock gold processing operations

Aħbarijiet tal-Industrija · 5 ta' Novembru 2026

Hard-Rock Ore Variability and the Case for Consistent Reagent Specifications

When the ore changes from block to block, the one thing that should not change is the reagent you are measuring it against.

Tweġiba Mgħaġġla

AngloGold Ashanti plans to invest US$200–250 million at the Cuiabá gold operation in Brazil, adding roughly 75,000 ounces of annual production to a 2025 base of 194,000 ounces. It is a brownfield expansion on an existing hard-rock circuit. For a plant whose ore varies from block to block, the procurement priority is not a new reagent but a stable one: one assay, one mesh cut, one K/R specification and one documentation standard per lot, so any change in plant performance can be attributed to the ore rather than to the delivery.

Teħid ta 'Ħlas Ewlenin

  • A brownfield increment, not a new plant. US$200–250 million adds about 75,000 oz/y on a 194,000 oz 2025 base.
  • Hard-rock feed varies. Grind size, sulphide exposure and gold liberation change dissolution kinetics between blocks.
  • Hold the reagent constant. A stable NaCN assay and a stable Karbonju specification make ore variability measurable instead of ambiguous.
  • COA per lot is the control instrument. Batch COA, TDS and MSDS let operators separate ore effects from delivery effects.
  • Carbon hardness ≥99% and attrition ≤1.5% keep loaded fines off the tailings stream when throughput rises.
  • One qualification, one freight plan. FOB or CIF only, with 15 / 18 / 28 MT minimum order quantities per 1×20' FCL.
Tabella tal-fatti datata · imħabbra fil-5 ta' Novembru 2026
PuntĊifra żvelata
Planned investment at Cuiabá200-250 miljun dollaru Amerikan
Incremental production~75,000 oz/y
Bażi 2025194,000 oz
postBrazil, within the wider brownfield programme

Source: company expansion announcement, 5 November 2026. All figures above are disclosed project numbers; no consumption figures have been estimated by the publisher.

1. Why ore variability makes specification stability valuable

In a hard-rock circuit, the ore delivered to the leach is never identical from one block to the next. Grind size changes liberation; sulphide and arsenic content change side-reaction demand; clay changes pulp rheology and oxygen transfer. Every one of those moves the dissolution curve and the reagent demand per tonne.

If the ore and the reagent both vary, the operator cannot tell which caused a change in recovery or consumption. Holding the reagent specification constant removes one variable. A NaCN assay that stays at ≥98.3%, a carbon lot that stays at ≥99% hardness with ≤1.5% attrition, and a fixed 6×12 mesh cut turn the reagent into a measuring instrument for the ore.

That is the practical argument for a single qualified supplier on a brownfield expansion: comparability. One set of test conditions, one documentation standard and one freight plan make deviations diagnosable.

2. Four difficulties in a variable hard-rock feed

2.1 Grind and liberation drift

Finer grind exposes more gold but also more gangue surface. Coarser grind leaves gold locked. Both change the optimum dosing profile, so the plant needs a curve per grind target.

2.2 Sulphide and arsenic side reactions

Copper, iron and arsenic minerals consume reagent through cyanocomplex formation. A new block with higher sulphide content raises consumption without raising recovery, which looks like a reagent problem unless the ore is tested.

2.3 Carbon fines at higher throughput

More circulation and screening cycles generate more fines. Because those fines carry adsorbed gold, the loss appears as a recovery gap rather than a consumable expense. Hardness ≥99% and attrition ≤1.5% on AC50 are the control points.

2.4 Multi-supplier drift

Two suppliers with nominally equivalent products can differ in assay, particle size distribution or impurity profile. Small differences compound across a long campaign and make trend data useless.

3. Tutorial: six steps to hold batch consistency

  1. Qualify one specification per product. Fix the NaCN assay band, the carbon hardness / attrition / mesh / K·R parameters and the leaching-agent pH and dosage band in writing before the first order.
  2. Require batch COA, TDS and MSDS per lot. File them against the delivery number, not in a shared folder, so any plant deviation can be traced to one lot.
  3. Sample on arrival. Retain a representative sample of each lot and verify the key assay or particle size parameter against the COA before the lot enters the circuit.
  4. Define an acceptance band. State what happens when a measured value falls outside it — hold, re-test or adjust the dosing set-point — and who authorises the decision.
  5. Log plant performance per lot. Consumption kg/t, pH, free ċjanur or residual reagent, dissolved gold and recovery should all sit next to the lot number.
  6. Separate ore effects from delivery effects. When performance shifts, check the ore blend first (step 1 of the feed-change method), then the COA. Do not adjust the set-point until both are known.

This routine costs little and protects the most valuable thing a plant owns during an expansion: comparable data.

4. Tabella tas-soluzzjoni tal-problemi

SintomuKawża probabbliL-ewwel verifika
Consumption up, recovery flatNew sulphide / arsenic blockOre mineralogy, bottle roll curve
Recovery down after finer grindGangue surface consuming reagentGrind size distribution, dosing profile
Carbon make-up risingFines from higher circulationAttrition ≤1.5%, screen aperture, tails assay
Trend data inconsistentTwo suppliers or two specs in useQualification record, COA per lot
Deviation cannot be tracedLot number not linked to plant logDelivery record, sampling and filing routine

5. Three products under one qualification

TraineeshipprodottFixed specification
XoljimentĊjanur tas-Sodju AuCyan™ NaCN (≥98.3%)Assay band, low NaOH / Na₂CO₃ / insolubles; 18 MT MOQ
AdsorbimentKarbonju Attivat mill-Qoxra tal-Ġewż tal-Indi AuCarb™ għall-Irkupru tad-Deheb (Ebusija ≥99%)6×12 mesh, attrition ≤1.5%, K ≥26 kg/t / R ≥50% on AC50; 15 MT MOQ
Rotta alternattivaAġent tal-Lixxivjar tad-Deheb AuLeach™ (GDA) – Mhux PerikolużpH 10.5–12, ore-validated dosage; 28 MT MOQ

All three ship factory-direct under FOB or CIF terms with batch COA, TDS and MSDS; AuCarb™ is packed in 25 kg heavy-duty laminated PE bags. Free laboratory test samples are available for AuCarb™ and AuLeach™.

6. Mistoqsijiet Frekwenti

Q1. What is planned at Cuiabá?
US$200–250 million of investment, adding roughly 75,000 ounces of annual production to a 2025 base of 194,000 ounces.

Q2. When was this announced?
5 November 2026, within the company's brownfield expansion programme.

Q3. Why does hard-rock ore complicate reagent control?
Grind size, sulphide exposure, arsenic and clay content all change dissolution kinetics and side-reaction demand between blocks.

Q4. Why hold the reagent specification constant?
So any change in recovery or consumption can be attributed to the ore rather than to a varying delivery.

Q5. What documents should accompany each lot?
COA tal-lott, TDS u MSDS, ippreżentati kontra numru tal-kunsinna sabiex id-devjazzjonijiet ikunu traċċabbli.

Q6. What should be sampled on arrival?
A representative sample of each lot, verified against the COA for the key assay or particle size parameter before use.

Q7. Which carbon parameters matter most here?
Hardness ≥99%, attrition ≤1.5%, platelet ≤5.0%, a 6×12 mesh cut and the K/R pair on AC50.

M8. Kif jiġi ppakkjat AuCarb™?
In 25 kg heavy-duty laminated PE bags at 15 MT MOQ per 1×20' FCL.

M9. Liema Incoterms japplikaw?
Japplikaw it-termini FOB jew CIF.

Q10. What is the operating window for AuLeach™?
pH 10.5–12 with a target around 11 ± 1, with dosage fixed by ore-specific testing.

Q11. Should the set-point be adjusted when performance shifts?
Only after the ore blend and the batch COA have both been checked, so the cause is known before the change is made.

Q12. Where are the product specifications published?
On the AuCyan™, AuCarb™ and AuLeach™ technical pages linked below.

7. Sorsi u links interni

AuCyan™ · Gwida AuCarb™ · AC50 · AC55 · AC60 · BC1100 · AuLeach™ GDA · Trijanglu tad-Deheb · Ħarsa ġenerali lejn tliet prodotti · Mistoqsijiet Frekwenti dwar il-Kimika · Aħbarijiet tal-Industrija · Ikkuntattjana

Source note: project figures are drawn from the company expansion announcement dated 5 November 2026. Reagent specifications are United Chemical product data.

Set up a batch consistency routine for your plant

Ikkuntatjana · WhatsApp +86 173 9270 5576 · info@unitedchemicalcn.com

  • Kontenut każwali
  • Kontenut sħun
  • Kontenut ta 'reviżjoni sħun

Inti tista 'ukoll tixtieq

Konsultazzjoni tal-messaġġi onlajn

Żid kumment:

8617392705576 +Kodiċi QR WhatsAppSkennja kodiċi QR
Ħalli messaġġ għall-konsultazzjoni
Grazzi tal-messaġġ tiegħek, aħna se nikkuntattjawk dalwaqt!
Issottometti
Servizz tal-Klijent Online